Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> wrote: > Add 8821A and 8812A chip type enums. > > Add cck_high_power member to struct rtw_hal. This will be used to > calculate the RX signal strength of RTL8812AU. > > Add various register definitions which will be used by the new drivers. > > Move some existing register definitions from rtw8821c.h and rtw8822b.h. > They were duplicated in those headers and will also be used by the new > drivers. > > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> Smatch warns drivers/net/wireless/realtek/rtw88/rtw8812a.c:619 rtw8812a_iqk() error: uninitialized symbol 'tx_x1'. drivers/net/wireless/realtek/rtw88/rtw8812a.c:621 rtw8812a_iqk() error: uninitialized symbol 'tx_y1'. Please respin patches 16-22. 15 patch(es) applied to rtw-next branch of rtw.git, thanks. d12722830ea4 wifi: rtw88: Add some definitions for RTL8821AU/RTL8812AU 87341ca1eac9 wifi: rtw88: Dump the HW features only for some chips d9018f437351 wifi: rtw88: Allow different C2H RA report sizes 95a772e30b60 wifi: rtw88: Extend the init table parsing for RTL8812AU 7c5bbeba7c36 wifi: rtw88: Allow rtw_chip_info.ltecoex_addr to be NULL fbb5e1b3637a wifi: rtw88: Let each driver control the power on/off process c7706b1173c7 wifi: rtw88: Enable data rate fallback for older chips abb0f19492ba wifi: rtw88: Make txagc_remnant_ofdm an array 82a617413e85 wifi: rtw88: Support TX page sizes bigger than 128 67d915604e69 wifi: rtw88: Move pwr_track_tbl to struct rtw_rfe_def 85bf3041a0ea wifi: rtw88: usb: Set pkt_info.ls for the reserved page 57289d30cd2a wifi: rtw88: Detect beacon loss with chips other than 8822c b19840afc051 wifi: rtw88: coex: Support chips without a scoreboard bfcee5ee924f wifi: rtw88: 8821a: Regularly ask for BT info updates f9e0189cbc2d wifi: rtw88: 8812a: Mitigate beacon loss --- https://github.com/pkshih/rtw.git
