Correct spelling here and there as suggested by codespell.
Signed-off-by: Dmitry Antipov <dmantipov@xxxxxxxxx>
---
v2: join the series
---
drivers/net/wireless/ath/ath11k/hal.h | 6 +++---
drivers/net/wireless/ath/ath11k/mac.c | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index dc8bbe073017..601542410c75 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -700,7 +700,7 @@ enum hal_rx_buf_return_buf_manager {
#define HAL_REO_CMD_FLG_UNBLK_RESOURCE BIT(7)
#define HAL_REO_CMD_FLG_UNBLK_CACHE BIT(8)
-/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO0_UPD_* feilds */
+/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO0_UPD_* fields */
#define HAL_REO_CMD_UPD0_RX_QUEUE_NUM BIT(8)
#define HAL_REO_CMD_UPD0_VLD BIT(9)
#define HAL_REO_CMD_UPD0_ALDC BIT(10)
@@ -725,7 +725,7 @@ enum hal_rx_buf_return_buf_manager {
#define HAL_REO_CMD_UPD0_PN_VALID BIT(29)
#define HAL_REO_CMD_UPD0_PN BIT(30)
-/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO1_* feilds */
+/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO1_* fields */
#define HAL_REO_CMD_UPD1_VLD BIT(16)
#define HAL_REO_CMD_UPD1_ALDC GENMASK(18, 17)
#define HAL_REO_CMD_UPD1_DIS_DUP_DETECTION BIT(19)
@@ -741,7 +741,7 @@ enum hal_rx_buf_return_buf_manager {
#define HAL_REO_CMD_UPD1_PN_HANDLE_ENABLE BIT(30)
#define HAL_REO_CMD_UPD1_IGNORE_AMPDU_FLG BIT(31)
-/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO2_* feilds */
+/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO2_* fields */
#define HAL_REO_CMD_UPD2_SVLD BIT(10)
#define HAL_REO_CMD_UPD2_SSN GENMASK(22, 11)
#define HAL_REO_CMD_UPD2_SEQ_2K_ERR BIT(23)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index e6acbff06749..7a75de8aec2b 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2230,7 +2230,7 @@ static void ath11k_peer_assoc_h_vht(struct ath11k *ar,
__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
/* In IPQ8074 platform, VHT mcs rate 10 and 11 is enabled by default.
- * VHT mcs rate 10 and 11 is not suppoerted in 11ac standard.
+ * VHT mcs rate 10 and 11 is not supported in 11ac standard.
* so explicitly disable the VHT MCS rate 10 and 11 in 11ac mode.
*/
arg->tx_mcs_set &= ~IEEE80211_VHT_MCS_SUPPORT_0_11_MASK;
@@ -6952,7 +6952,7 @@ static void ath11k_mac_op_remove_interface(struct ieee80211_hw *hw,
/* Recalc txpower for remaining vdev */
ath11k_mac_txpower_recalc(ar);
- /* TODO: recal traffic pause state based on the available vdevs */
+ /* TODO: recalc traffic pause state based on the available vdevs */
mutex_unlock(&ar->conf_mutex);
}
--
2.47.0
