Search Linux Wireless

[PATCH v2 1/2] dt-bindings: net: wireless: ath11k-pci: add firmware-name property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is the same optional property that defined in qcom,ath10k.yaml. It's
useful for the platform / board to specify firmware through device-tree.

Signed-off-by: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
---
 .../devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml  | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
index a71fdf05bc1e..2aa81690f7d5 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2023 Linaro Limited
+# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml#
@@ -29,6 +30,12 @@ properties:
       string to uniquely identify variant of the calibration data for designs
       with colliding bus and device ids
 
+  firmware-name:
+    maxItems: 1
+    description:
+      If present, a board or platform specific string used to lookup firmware
+      files for the device.
+
   vddrfacmn-supply:
     description: VDD_RFA_CMN supply regulator handle
 
-- 
2.25.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux