The RTL8821AU firmware sends C2H_BT_INFO by itself when bluetooth
headphones are connected, but not when they are disconnected. This leads
to the coexistence code still using the A2DP algorithm long after the
headphones are disconnected, which means the wifi speeds are much lower
than they should be. Work around this by asking for updates every two
seconds if the chip is RTL8821AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
v2:
- Move the logic to a separate function and add a comment about it.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw88/coex.c | 2 +-
drivers/net/wireless/realtek/rtw88/coex.h | 11 +++++++++++
drivers/net/wireless/realtek/rtw88/main.c | 1 +
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw88/coex.c b/drivers/net/wireless/realtek/rtw88/coex.c
index 8f2b472589db..c929db1e53ca 100644
--- a/drivers/net/wireless/realtek/rtw88/coex.c
+++ b/drivers/net/wireless/realtek/rtw88/coex.c
@@ -446,7 +446,7 @@ static void rtw_coex_check_rfk(struct rtw_dev *rtwdev)
}
}
-static void rtw_coex_query_bt_info(struct rtw_dev *rtwdev)
+void rtw_coex_query_bt_info(struct rtw_dev *rtwdev)
{
struct rtw_coex *coex = &rtwdev->coex;
struct rtw_coex_stat *coex_stat = &coex->stat;
diff --git a/drivers/net/wireless/realtek/rtw88/coex.h b/drivers/net/wireless/realtek/rtw88/coex.h
index 57cf29da9ea4..c398be8391f7 100644
--- a/drivers/net/wireless/realtek/rtw88/coex.h
+++ b/drivers/net/wireless/realtek/rtw88/coex.h
@@ -384,6 +384,7 @@ u32 rtw_coex_read_indirect_reg(struct rtw_dev *rtwdev, u16 addr);
void rtw_coex_write_indirect_reg(struct rtw_dev *rtwdev, u16 addr,
u32 mask, u32 val);
void rtw_coex_write_scbd(struct rtw_dev *rtwdev, u16 bitpos, bool set);
+void rtw_coex_query_bt_info(struct rtw_dev *rtwdev);
void rtw_coex_bt_relink_work(struct work_struct *work);
void rtw_coex_bt_reenable_work(struct work_struct *work);
@@ -419,4 +420,14 @@ static inline bool rtw_coex_disabled(struct rtw_dev *rtwdev)
return coex_stat->bt_disabled;
}
+static inline void rtw_coex_active_query_bt_info(struct rtw_dev *rtwdev)
+{
+ /* The RTL8821AU firmware doesn't send C2H_BT_INFO by itself
+ * when bluetooth headphones are disconnected, so we have to
+ * ask for it regularly.
+ */
+ if (rtwdev->chip->id == RTW_CHIP_TYPE_8821A && rtwdev->efuse.btcoex)
+ rtw_coex_query_bt_info(rtwdev);
+}
+
#endif
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 65d20ad02667..e91530ed05a0 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -274,6 +274,7 @@ static void rtw_watch_dog_work(struct work_struct *work)
rtw_leave_lps(rtwdev);
rtw_coex_wl_status_check(rtwdev);
rtw_coex_query_bt_hid_list(rtwdev);
+ rtw_coex_active_query_bt_info(rtwdev);
rtw_phy_dynamic_mechanism(rtwdev);
--
2.46.0
