Search Linux Wireless

Re: [RFC PATCH 1/6] dt-bindings: net: wireless: update required properties for ath12k PCI module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/23/2024 12:17 PM, Krzysztof Kozlowski wrote:
> On 23/10/2024 08:45, Raj Kumar Bhagat wrote:
>> On 10/23/2024 12:05 PM, Krzysztof Kozlowski wrote:
>>> On 23/10/2024 08:03, Raj Kumar Bhagat wrote:
>>>> The current device-tree bindings for the Ath12K module list many
>>>> WCN7850-specific properties as required. However, these properties are
>>>> not applicable to other Ath12K devices.
>>>>
>>>> Hence, remove WCN7850-specific properties from the required section,
>>>> retaining only generic properties valid across all Ath12K devices.
>>>> WCN7850-specific properties will remain required based on the device's
>>>> compatible enum.
>>> Just not true. These apply to all devices described in this binding.
>>>
>>> NAK.
>>>
>>> Don't send patches for your downstream stuff.
>> This is not for downstream. This series is the per-requisite for ath12k
>> MLO support in upstream.
>>
>> In the subsequent patch [2/6] we are adding new device (QCN9274) in this
>> binding that do not require the WCN7850 specific properties.
>>
>> This is a refactoring patch for the next patch [2/6].
> It's just wrong. Not true. At this point of patch there are no other
> devices. Don't refactor uselessly introducing incorrect hardware

Ok then, If we squash this patch with the next patch [2/6], that actually adding
the new device, then this patch changes are valid right?




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux