ath12k_mac_monitor_vdev_create() will set NSS and TX power for monitor
vdev. But this is not needed for monitor vdev.
So delete them.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/mac.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index f60219cc01aa..f21a155ca168 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -1091,7 +1091,6 @@ static int ath12k_mac_monitor_vdev_create(struct ath12k *ar)
struct ath12k_wmi_vdev_create_arg arg = {};
int bit, ret;
u8 tmp_addr[6];
- u16 nss;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
@@ -1131,19 +1130,6 @@ static int ath12k_mac_monitor_vdev_create(struct ath12k *ar)
return ret;
}
- nss = hweight32(ar->cfg_tx_chainmask) ? : 1;
- ret = ath12k_wmi_vdev_set_param_cmd(ar, ar->monitor_vdev_id,
- WMI_VDEV_PARAM_NSS, nss);
- if (ret) {
- ath12k_warn(ar->ab, "failed to set vdev %d chainmask 0x%x, nss %d :%d\n",
- ar->monitor_vdev_id, ar->cfg_tx_chainmask, nss, ret);
- return ret;
- }
-
- ret = ath12k_mac_txpower_recalc(ar);
- if (ret)
- return ret;
-
ar->allocated_vdev_map |= 1LL << ar->monitor_vdev_id;
ar->ab->free_vdev_map &= ~(1LL << ar->monitor_vdev_id);
ar->num_created_vdevs++;
--
2.34.1
