It has been reported [0] that a 3-4 seconds (actually up to 5 sec) of radio silence could be observed followed by the error below on ath10k devices: ath10k_pci 0000:04:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 This is due to how the TX queues are flushed in ath10k. When a STA is removed, mac80211 need to flush queues [1], but because ath10k does not have a lightweight .flush_sta operation, ieee80211_flush_queues() is called instead effectively blocking the whole queue during the drain causing this radio silence. Also because ath10k_flush() waits for all queued to be emptied, not only the flushed ones it could more easily take up to 5 seconds to finish making the whole situation worst. The first patch of this series adds a .flush_sta operation to flush only specific STA traffic avoiding the need to stop whole queues and should be enough in itself to fix the reported issue. The second patch of this series is a proposal to improve ath10k_flush so that it will be less likely to timeout waiting for non related queues to drain. The abose kernel warning could still be observed (e.g. flushing a dead STA) but should be now harmless. [0]: https://lore.kernel.org/all/CA+Xfe4FjUmzM5mvPxGbpJsF3SvSdE5_wgxvgFJ0bsdrKODVXCQ@xxxxxxxxxxxxxx/ [1]: commit 0b75a1b1e42e ("wifi: mac80211: flush queues on STA removal") Remi Pommarel (2): wifi: ath10k: Implement ieee80211 flush_sta callback wifi: ath10k: Flush only requested txq in ath10k_flush() drivers/net/wireless/ath/ath10k/core.h | 4 ++ drivers/net/wireless/ath/ath10k/htt.h | 11 +++- drivers/net/wireless/ath/ath10k/htt_tx.c | 50 +++++++++++++++- drivers/net/wireless/ath/ath10k/mac.c | 76 ++++++++++++++++++++---- drivers/net/wireless/ath/ath10k/txrx.c | 5 +- 5 files changed, 129 insertions(+), 17 deletions(-) -- 2.40.0
