Search Linux Wireless

[PATCH 13/14] wifi: mac80211: chan: calculate min_def also for client mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Johannes Berg <johannes.berg@xxxxxxxxx>

In order to deal with (temporary) bandwidth reductions to/from
the AP such as the upcoming RX OMI changes, modify the min_def
calculation to also not take the chanreq width into account in
client mode. This normally changes nothing as the AP bandwidth
will be the same as the channel request's width. In the RX OMI
changes, however, the code will reduce the bandwidth for only
the AP STA, since the OMI is only to that, and TDLS STAs are
unaffected. Using the min_def for this case simplifies RX OMI
a lot.

Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@xxxxxxxxx>
---
 net/mac80211/chan.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index e01302ea9157..04db6f3ae528 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -323,18 +323,26 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
 			continue;
 
 		switch (link->sdata->vif.type) {
-		case NL80211_IFTYPE_AP:
-		case NL80211_IFTYPE_AP_VLAN:
-			width = ieee80211_get_max_required_bw(link);
-			break;
 		case NL80211_IFTYPE_STATION:
+			if (!link->sdata->vif.cfg.assoc) {
+				/*
+				 * The AP's sta->bandwidth may not yet be set
+				 * at this point (pre-association), so simply
+				 * take the width from the chandef. We cannot
+				 * have TDLS peers yet (only after association).
+				 */
+				width = link->conf->chanreq.oper.width;
+				break;
+			}
 			/*
-			 * The ap's sta->bandwidth is not set yet at this
-			 * point, so take the width from the chandef, but
-			 * account also for TDLS peers
+			 * otherwise just use min_def like in AP, depending on what
+			 * we currently think the AP STA (and possibly TDLS peers)
+			 * require(s)
 			 */
-			width = max(link->conf->chanreq.oper.width,
-				    ieee80211_get_max_required_bw(link));
+			fallthrough;
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_AP_VLAN:
+			width = ieee80211_get_max_required_bw(link);
 			break;
 		case NL80211_IFTYPE_P2P_DEVICE:
 		case NL80211_IFTYPE_NAN:
-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux