Resend since I had a typo in the ath12k e-mail list On 9/18/2024 9:05 AM, Jeff Johnson wrote: > On 9/18/2024 7:40 AM, Dieter Knueppel wrote: >> Dear developer team, >> >> I have to admit, the earlier post "HTT timeout error with NCM86" is my >> fault, sorry for causing confusion. >> >> Due to earlier tests with legacy cards, the PCIe slot was still forced >> to Gen2 :-( >> >> Putting it back to <auto>, with "MSI HERALD-BE", similar to "Gigabyte >> WC-WIFI7" i >> >> consistently get: "Unknown hardware version found for WCN7850: 0xf" >> >> Which nails down to the question whether any of these adapter is already >> supported? >> >> The M.2 NCM865 card as such seems to be supported. >> >> I'm wondering about the difference, as there seems to be no additional >> logic compiled >> >> on one of the two PCIe boards, just bit of glue logic. > > For better support on ath12k driver issues please include the ath12k driver > list (I've added it to this reply). > > In your original e-mail you said: >> I'm trying to get "MSI HERALD-BE NCM865" up and running within a kvm > > The ath12k driver does not support running in a VM. Even prior ath11k-based > hardware doesn't support it. > > For ath11k there are some manual steps that have made it work, so if you are > adventurous you can try doing something similar with ath12k. Refer to: > https://lore.kernel.org/all/adcb785e-4dc7-4c4a-b341-d53b72e13467@xxxxxxxxx/ > > /jeff >