Hi On 2024-09-16, Ping-Ke Shih wrote: > Stefan Lippers-Hollmann <s.l-h@xxxxxx> wrote: > > On 2024-03-13, Ping-Ke Shih wrote: > > > On Wed, 2024-03-13 at 06:49 +0100, Stefan Lippers-Hollmann wrote: > > > > On 2024-03-13, Bitterblue Smith wrote: > > > > > Create the new module rtl8192d-common and move some code into it from > > > > > rtl8192de. Now the rtl8192de driver (PCI) and the new rtl8192du driver > > > > > (USB) can share some of the code. > > [...] > > > > Using the firmware from https://github.com/lwfinger/rtl8192du/, > > > > it would be great if someone could publish the necessary firmware > > > > to linux-firmware. > > > > > > > > MD5: > > > > abccba1e9bb456eb81dfc88502a56300 /lib/firmware/rtlwifi/rtl8192dufw.bin > > I found its version is 38 that is little bit older than [1] (version 39). > Bitterblue has made a binary from [1] and I have verified the binary. > I will send this firmware days later because my previous firmware is > still under review. [...] > [1] https://github.com/lwfinger/rtl8192du/blob/master/hal/Hal8192DUHWImg.c Great, just a quick functionality check with this firmware (v39): MD5: 18eb8791673dcc38b268ad19c92ba6a2 */lib/firmware/rtlwifi/rtl8192dufw.bin SHA256: 710c4a28904b180e5a316a372e1038972102b2545909bc117c2455cf536e4490 */lib/firmware/rtlwifi/rtl8192dufw.bin Connects and works fine with kernel v6.11, using WPA3SAE over 5 GHz. [ 202.941904] usb 3-5: new high-speed USB device number 5 using xhci_hcd [ 203.070437] usb 3-5: New USB device found, idVendor=0bda, idProduct=8194, bcdDevice= 0.00 [ 203.070453] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 203.070460] usb 3-5: Product: 802.11n NIC [ 203.070464] usb 3-5: Manufacturer: Realtek [ 203.070468] usb 3-5: SerialNumber: 00e04c000001 [ 203.220236] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 203.220248] rtl8192du: Driver for Realtek RTL8192DU WLAN interface [ 203.220249] rtl8192du: Loading firmware file rtlwifi/rtl8192dufw.bin [ 203.220324] ieee80211 phy1: Selected rate control algorithm 'rtl_rc' [ 203.220648] usbcore: registered new interface driver rtl8192du [ 203.227708] rtl8192du 3-5:1.0 wlxXXXlocalMACXXX: renamed from wlan0 [ 230.852662] wlxXXXlocalMACXXX: authenticate with XXXAP1MACXXX (local address=XXXlocalMACXXX) [ 230.852670] wlxXXXlocalMACXXX: send auth to XXXAP1MACXXX (try 1/3) [ 230.870370] wlxXXXlocalMACXXX: authenticate with XXXAP1MACXXX (local address=XXXlocalMACXXX) [ 230.870381] wlxXXXlocalMACXXX: send auth to XXXAP1MACXXX (try 1/3) [ 230.873195] wlxXXXlocalMACXXX: authenticated [ 230.874472] wlxXXXlocalMACXXX: associate with XXXAP1MACXXX (try 1/3) [ 230.885511] wlxXXXlocalMACXXX: RX AssocResp from XXXAP1MACXXX (capab=0x1511 status=0 aid=2) [ 230.887245] wlxXXXlocalMACXXX: associated [ 230.897180] wlxXXXlocalMACXXX: Limiting TX power to 23 (23 - 0) dBm as advertised by XXXAP1MACXXX [ 240.889472] wlxXXXlocalMACXXX: deauthenticating from XXXAP1MACXXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 244.386457] wlxXXXlocalMACXXX: authenticate with XXXAP2MACXXX (local address=XXXlocalMACXXX) [ 244.386470] wlxXXXlocalMACXXX: send auth to XXXAP2MACXXX (try 1/3) [ 244.397502] wlxXXXlocalMACXXX: authenticate with XXXAP2MACXXX (local address=XXXlocalMACXXX) [ 244.397515] wlxXXXlocalMACXXX: send auth to XXXAP2MACXXX (try 1/3) [ 244.399226] wlxXXXlocalMACXXX: authenticated [ 244.400306] wlxXXXlocalMACXXX: associate with XXXAP2MACXXX (try 1/3) [ 244.407420] wlxXXXlocalMACXXX: RX AssocResp from XXXAP2MACXXX (capab=0x1511 status=0 aid=3) [ 244.408977] wlxXXXlocalMACXXX: associated [ 244.461286] wlxXXXlocalMACXXX: Limiting TX power to 23 (23 - 0) dBm as advertised by XXXAP2MACXXX (there is AP-side active bandsteering/ roaming at play) # wpa_cli -i wlxXXXlocalMACXXX status bssid=XXXAP2MACXXX freq=5260 ssid=XXX id=4 id_str=XXX mode=station wifi_generation=4 pairwise_cipher=CCMP group_cipher=CCMP key_mgmt=SAE pmf=2 mgmt_group_cipher=BIP sae_group=19 sae_h2e=0 sae_pk=0 wpa_state=COMPLETED p2p_device_address=XXXlocalMACXXX address=XXXlocalMACXXX uuid=XXXUUIDXXX $ iperf3 -c XXXremoteIPv6XXX Connecting to host XXXremoteIPv6XXX, port 5201 [ 5] local XXXlocalXXX port 45116 connected to XXXremoteIPv6XXX port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 13.9 MBytes 116 Mbits/sec 0 441 KBytes [ 5] 1.00-2.00 sec 12.1 MBytes 102 Mbits/sec 0 471 KBytes [ 5] 2.00-3.00 sec 11.4 MBytes 95.4 Mbits/sec 0 471 KBytes [ 5] 3.00-4.00 sec 12.5 MBytes 105 Mbits/sec 0 604 KBytes [ 5] 4.00-5.00 sec 11.1 MBytes 93.3 Mbits/sec 0 604 KBytes [ 5] 5.00-6.00 sec 11.4 MBytes 95.4 Mbits/sec 0 604 KBytes [ 5] 6.00-7.00 sec 11.9 MBytes 99.6 Mbits/sec 0 637 KBytes [ 5] 7.00-8.00 sec 10.8 MBytes 90.2 Mbits/sec 0 637 KBytes [ 5] 8.00-9.00 sec 11.8 MBytes 98.6 Mbits/sec 0 637 KBytes [ 5] 9.00-10.00 sec 12.0 MBytes 101 Mbits/sec 0 722 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 119 MBytes 99.6 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 116 MBytes 97.2 Mbits/sec receiver iperf Done. $ iperf3 -c XXXremoteIPv6XXX --reverse Connecting to host XXXremoteIPv6XXX, port 5201 Reverse mode, remote host XXXremoteIPv6XXX is sending [ 5] local XXXlocalXXX port 58256 connected to XXXremoteIPv6XXX port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 12.6 MBytes 106 Mbits/sec [ 5] 1.00-2.00 sec 13.6 MBytes 114 Mbits/sec [ 5] 2.00-3.00 sec 14.1 MBytes 118 Mbits/sec [ 5] 3.00-4.00 sec 14.0 MBytes 117 Mbits/sec [ 5] 4.00-5.00 sec 12.2 MBytes 103 Mbits/sec [ 5] 5.00-6.00 sec 14.2 MBytes 120 Mbits/sec [ 5] 6.00-7.00 sec 12.5 MBytes 105 Mbits/sec [ 5] 7.00-8.00 sec 12.5 MBytes 105 Mbits/sec [ 5] 8.00-9.00 sec 13.9 MBytes 116 Mbits/sec [ 5] 9.00-10.00 sec 14.1 MBytes 118 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 138 MBytes 116 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 134 MBytes 112 Mbits/sec receiver iperf Done. $ iperf3 -c XXXremoteIPv6XXX --bidir Connecting to host XXXremoteIPv6XXX, port 5201 [ 5] local XXXlocalXXX port 50634 connected to XXXremoteIPv6XXX port 5201 [ 7] local XXXlocalXXX port 50646 connected to XXXremoteIPv6XXX port 5201 [ ID][Role] Interval Transfer Bitrate Retr Cwnd [ 5][TX-C] 0.00-1.00 sec 6.25 MBytes 52.4 Mbits/sec 0 300 KBytes [ 7][RX-C] 0.00-1.00 sec 7.00 MBytes 58.7 Mbits/sec [ 5][TX-C] 1.00-2.00 sec 3.88 MBytes 32.5 Mbits/sec 0 414 KBytes [ 7][RX-C] 1.00-2.00 sec 10.1 MBytes 84.9 Mbits/sec [ 5][TX-C] 2.00-3.00 sec 1.88 MBytes 15.7 Mbits/sec 0 464 KBytes [ 7][RX-C] 2.00-3.00 sec 12.4 MBytes 104 Mbits/sec [ 5][TX-C] 3.00-4.00 sec 1.88 MBytes 15.7 Mbits/sec 0 487 KBytes [ 7][RX-C] 3.00-4.00 sec 12.2 MBytes 103 Mbits/sec [ 5][TX-C] 4.00-5.00 sec 2.38 MBytes 19.9 Mbits/sec 0 582 KBytes [ 7][RX-C] 4.00-5.00 sec 10.9 MBytes 91.2 Mbits/sec [ 5][TX-C] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec 0 602 KBytes [ 7][RX-C] 5.00-6.00 sec 10.2 MBytes 86.0 Mbits/sec [ 5][TX-C] 6.00-7.00 sec 1.50 MBytes 12.6 Mbits/sec 0 661 KBytes [ 7][RX-C] 6.00-7.00 sec 10.6 MBytes 89.1 Mbits/sec [ 5][TX-C] 7.00-8.00 sec 1.38 MBytes 11.5 Mbits/sec 0 728 KBytes [ 7][RX-C] 7.00-8.00 sec 11.5 MBytes 96.5 Mbits/sec [ 5][TX-C] 8.00-9.00 sec 1.38 MBytes 11.5 Mbits/sec 0 777 KBytes [ 7][RX-C] 8.00-9.00 sec 10.4 MBytes 87.0 Mbits/sec [ 5][TX-C] 9.00-10.00 sec 1.38 MBytes 11.5 Mbits/sec 2 593 KBytes [ 7][RX-C] 9.00-10.00 sec 11.1 MBytes 93.1 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-10.00 sec 21.9 MBytes 18.3 Mbits/sec 2 sender [ 5][TX-C] 0.00-10.02 sec 19.5 MBytes 16.3 Mbits/sec receiver [ 7][RX-C] 0.00-10.00 sec 110 MBytes 92.7 Mbits/sec 0 sender [ 7][RX-C] 0.00-10.02 sec 106 MBytes 89.2 Mbits/sec receiver iperf Done. # iw dev wlxXXXlocalMACXXX station dump Station XXXAP2MACXXX (on wlxXXXlocalMACXXX) inactive time: 1 ms rx bytes: 819594565 rx packets: 556734 tx bytes: 379056249 tx packets: 427613 tx retries: 0 tx failed: 0 beacon loss: 0 rx drop misc: 0 signal: 10 dBm signal avg: -66 dBm tx bitrate: 300.0 MBit/s MCS 15 40MHz short GI tx duration: 0 us rx bitrate: 243.0 MBit/s MCS 14 40MHz rx duration: 0 us authorized: yes authenticated: yes associated: yes preamble: long WMM/WME: yes MFP: yes TDLS peer: no DTIM period: 3 beacon interval:100 short slot time:yes connected time: 556 seconds associated at [boottime]: 244.363s associated at: 1726480574210 ms current time: 1726481129874 ms # iw phy phy1 info Wiphy phy1 wiphy index: 1 max # scan SSIDs: 4 max scan IEs length: 2257 bytes max # sched scan SSIDs: 0 max # match sets: 0 RTS threshold: 2347 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP-128 (00-0f-ac:4) * CCMP-256 (00-0f-ac:10) * GCMP-128 (00-0f-ac:8) * GCMP-256 (00-0f-ac:9) * CMAC (00-0f-ac:6) * CMAC-256 (00-0f-ac:13) * GMAC-128 (00-0f-ac:11) * GMAC-256 (00-0f-ac:12) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * mesh point * P2P-client * P2P-GO Band 1: Capabilities: 0x186e HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI No RX STBC Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 16 usec (0x07) HT Max RX data rate: 300 Mbps HT TX/RX MCS rate indexes supported: 0-15, 32 Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps * 5.5 Mbps * 11.0 Mbps * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 2412.0 MHz [1] (20.0 dBm) * 2417.0 MHz [2] (20.0 dBm) * 2422.0 MHz [3] (20.0 dBm) * 2427.0 MHz [4] (20.0 dBm) * 2432.0 MHz [5] (20.0 dBm) * 2437.0 MHz [6] (20.0 dBm) * 2442.0 MHz [7] (20.0 dBm) * 2447.0 MHz [8] (20.0 dBm) * 2452.0 MHz [9] (20.0 dBm) * 2457.0 MHz [10] (20.0 dBm) * 2462.0 MHz [11] (20.0 dBm) * 2467.0 MHz [12] (20.0 dBm) * 2472.0 MHz [13] (20.0 dBm) * 2484.0 MHz [14] (disabled) Band 2: Capabilities: 0x186e HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI No RX STBC Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 16 usec (0x07) HT Max RX data rate: 300 Mbps HT TX/RX MCS rate indexes supported: 0-15, 32 Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 5180.0 MHz [36] (23.0 dBm) * 5200.0 MHz [40] (23.0 dBm) * 5220.0 MHz [44] (23.0 dBm) * 5240.0 MHz [48] (23.0 dBm) * 5260.0 MHz [52] (20.0 dBm) (no IR, radar detection) * 5280.0 MHz [56] (20.0 dBm) (no IR, radar detection) * 5300.0 MHz [60] (20.0 dBm) (no IR, radar detection) * 5320.0 MHz [64] (20.0 dBm) (no IR, radar detection) * 5500.0 MHz [100] (26.0 dBm) (no IR, radar detection) * 5520.0 MHz [104] (26.0 dBm) (no IR, radar detection) * 5540.0 MHz [108] (26.0 dBm) (no IR, radar detection) * 5560.0 MHz [112] (26.0 dBm) (no IR, radar detection) * 5580.0 MHz [116] (26.0 dBm) (no IR, radar detection) * 5600.0 MHz [120] (26.0 dBm) (no IR, radar detection) * 5620.0 MHz [124] (26.0 dBm) (no IR, radar detection) * 5640.0 MHz [128] (26.0 dBm) (no IR, radar detection) * 5660.0 MHz [132] (26.0 dBm) (no IR, radar detection) * 5680.0 MHz [136] (26.0 dBm) (no IR, radar detection) * 5700.0 MHz [140] (26.0 dBm) (no IR, radar detection) * 5745.0 MHz [149] (13.0 dBm) * 5765.0 MHz [153] (13.0 dBm) * 5785.0 MHz [157] (13.0 dBm) * 5805.0 MHz [161] (13.0 dBm) * 5825.0 MHz [165] (13.0 dBm) Supported commands: * new_interface * set_interface * new_key * start_ap * new_station * new_mpath * set_mesh_config * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * frame * frame_wait_cancel * set_wiphy_netns * set_channel * probe_client * set_noack_map * register_beacons * start_p2p_device * set_mcast_rate * testmode * connect * disconnect * set_qos_map * set_multicast_to_unicast software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports low priority scan. Device supports scan flush. Device supports AP scan. Device supports per-vif TX power setting Driver supports full state transitions for AP/GO clients Driver supports a userspace MPM Device supports configuring vdev MAC-addr on create. max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xb0 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * P2P-device: 0x40 0xd0 Supported extended features: * [ RRM ]: RRM * [ FILS_STA ]: STA FILS (Fast Initial Link Setup) * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs * [ SCAN_RANDOM_SN ]: use random sequence numbers in scans * [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support * [ DEL_IBSS_STA ]: deletion of IBSS station support * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support * [ POWERED_ADDR_CHANGE ]: can change MAC address while up Regards Stefan Lippers-Hollmann
Attachment:
pgpM9oyPdzWSr.pgp
Description: Digitale Signatur von OpenPGP