disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
---
drivers/net/ieee802154/mcr20a.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
index 433fb5839203..020d392a98b6 100644
--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -1302,16 +1302,13 @@ mcr20a_probe(struct spi_device *spi)
irq_type = IRQF_TRIGGER_FALLING;
ret = devm_request_irq(&spi->dev, spi->irq, mcr20a_irq_isr,
- irq_type, dev_name(&spi->dev), lp);
+ irq_type | IRQF_NO_AUTOEN, dev_name(&spi->dev), lp);
if (ret) {
dev_err(&spi->dev, "could not request_irq for mcr20a\n");
ret = -ENODEV;
goto free_dev;
}
- /* disable_irq by default and wait for starting hardware */
- disable_irq(spi->irq);
-
ret = ieee802154_register_hw(hw);
if (ret) {
dev_crit(&spi->dev, "ieee802154_register_hw failed\n");
--
2.34.1
