This is in preparation for removing platform_data support from ath9k. Except for led-active-high, these are already present downstream in OpenWrt and never upstreamed. For tx_gain_buffalo, just set it based on the device. The flag was made for a single device. Instead of adding an extra option, just look for the compatible string. Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx> --- drivers/net/wireless/ath/ath9k/init.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 7fad7e75af6a..88db51ec7e55 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -670,6 +670,7 @@ static int ath9k_of_init(struct ath_softc *sc) struct ath_common *common = ath9k_hw_common(ah); enum ath_bus_type bus_type = common->bus_ops->ath_bus_type; char eeprom_name[100]; + u8 led_pin; int ret; if (!of_device_is_available(np)) @@ -691,6 +692,12 @@ static int ath9k_of_init(struct ath_softc *sc) ah->ah_flags |= AH_NO_EEP_SWAP; } + if (!of_property_read_u8(np, "qca,led-pin", &led_pin)) + ah->led_pin = led_pin; + + ah->config.led_active_high = of_property_read_bool(np, "qca,led-active-high"); + ah->config.tx_gain_buffalo = of_device_is_compatible(np, "buffalo,wzr-hp-g450h"); + of_get_mac_address(np, common->macaddr); return 0; -- 2.46.0
