Tried this, and I'm getting slightly odd results. The two nodes running with these lines commented out can see the node whose code is previous to the PCU patch, but they cant see each other. Also the other node can see both of them... very strange. Cheers Keir 2008/12/17 Nick Kossifidis <mickflemm@xxxxxxxxx>: > 2008/12/16 Andrey Yurovsky <andrey@xxxxxxxxxxx>: >> Hi Keir. What type of Atheros-based card are you using? How many >> antennas do you have connected? If I understand things correctly, the >> PCU code regression (with respect to mesh and maybe AP and IBSS) has >> to do with having one antenna hooked up when your hardware also has an >> AUX antenna connector. If you have only one antenna, can you please >> plug in a second one and try again (before and after the commit in >> question)? I will try to do the same test here. More details from >> Nick were posted here: >> http://marc.info/?l=linux-wireless&m=122771338021489&w=2 >> > > To summarize, the following code on base.c is the problem... > > 1955 /* > 1956 * Switch antenna every 4 beacons if txantenna is not set > 1957 * XXX assumes two antennas > 1958 */ > 1959 if (antenna == 0) > 1960 antenna = sc->bsent & 4 ? 2 : 1; > > ...we should always set 0 on tx descriptor for the default scenario to > work. Can you please comment this out and see if it works ? > > -- > GPG ID: 0xD21DB2DB > As you read this post global entropy rises. Have Fun ;-) > Nick > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
