Search Linux Wireless

[PATCH net-next 06/12] net: ethernet: hisilicon: Convert using devm_clk_get_enabled() in hisi_femac_drv_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use devm_clk_get_enabled() instead of devm_clk_get() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path, drop
the out_disable_clk label, and the original error process can change to
the out_free_netdev error path.

Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx>
---
 drivers/net/ethernet/hisilicon/hisi_femac.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hisi_femac.c b/drivers/net/ethernet/hisilicon/hisi_femac.c
index 2406263c9dd3..ffb6f4751d8b 100644
--- a/drivers/net/ethernet/hisilicon/hisi_femac.c
+++ b/drivers/net/ethernet/hisilicon/hisi_femac.c
@@ -797,23 +797,17 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
 		goto out_free_netdev;
 	}
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	priv->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		dev_err(dev, "failed to get clk\n");
 		ret = -ENODEV;
 		goto out_free_netdev;
 	}
 
-	ret = clk_prepare_enable(priv->clk);
-	if (ret) {
-		dev_err(dev, "failed to enable clk %d\n", ret);
-		goto out_free_netdev;
-	}
-
 	priv->mac_rst = devm_reset_control_get(dev, "mac");
 	if (IS_ERR(priv->mac_rst)) {
 		ret = PTR_ERR(priv->mac_rst);
-		goto out_disable_clk;
+		goto out_free_netdev;
 	}
 	hisi_femac_core_reset(priv);
 
@@ -826,7 +820,7 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
 						 priv->phy_reset_delays,
 						 DELAYS_NUM);
 		if (ret)
-			goto out_disable_clk;
+			goto out_free_netdev;
 		hisi_femac_phy_reset(priv);
 	}
 
@@ -834,7 +828,7 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
 	if (!phy) {
 		dev_err(dev, "connect to PHY failed!\n");
 		ret = -ENODEV;
-		goto out_disable_clk;
+		goto out_free_netdev;
 	}
 
 	phy_attached_print(phy, "phy_id=0x%.8lx, phy_mode=%s\n",
@@ -885,8 +879,6 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
 out_disconnect_phy:
 	netif_napi_del(&priv->napi);
 	phy_disconnect(phy);
-out_disable_clk:
-	clk_disable_unprepare(priv->clk);
 out_free_netdev:
 	free_netdev(ndev);
 
@@ -902,7 +894,6 @@ static void hisi_femac_drv_remove(struct platform_device *pdev)
 	unregister_netdev(ndev);
 
 	phy_disconnect(ndev->phydev);
-	clk_disable_unprepare(priv->clk);
 	free_netdev(ndev);
 }
 
-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux