> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > Sent: Friday, August 30, 2024 7:14 PM > To: David Lin <yu-hao.lin@xxxxxxx> > Cc: Francesco Dolcini <francesco@xxxxxxxxxx>; linux-wireless@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx; briannorris@xxxxxxxxxxxx; kvalo@xxxxxxxxxx; > Pete Hsieh <tsung-hsien.hsieh@xxxxxxx> > Subject: Re: [EXT] Re: [PATCH] wifi: mwifiex: avoid AP and STA running on > different channel > > Caution: This is an external email. Please take care when clicking links or > opening attachments. When in doubt, report the message using the 'Report > this email' button > > > On Fri, Aug 30, 2024 at 10:58:50AM +0000, David Lin wrote: > > > From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > > > Sent: Friday, August 30, 2024 5:19 PM > > > To: Francesco Dolcini <francesco@xxxxxxxxxx> > > > Cc: David Lin <yu-hao.lin@xxxxxxx>; linux-wireless@xxxxxxxxxxxxxxx; > > > linux-kernel@xxxxxxxxxxxxxxx; briannorris@xxxxxxxxxxxx; > > > kvalo@xxxxxxxxxx; Pete Hsieh <tsung-hsien.hsieh@xxxxxxx> > > > Subject: [EXT] Re: [PATCH] wifi: mwifiex: avoid AP and STA running > > > on different channel > > > > > > On Fri, Aug 30, 2024 at 10:10:30AM +0200, Francesco Dolcini wrote: > > > > +Sascha, that just sent a patch to handle the same issue. > > > > > > > > On Fri, Aug 30, 2024 at 11:06:30AM +0800, David Lin wrote: > > > > > Current firmware doesn't support AP and STA running on different > > > > > channels simultaneously. > > > > > FW crash would occur in such case. > > > > > This patch avoids the issue by disabling AP and STA to run on > > > > > different channels. > > > > > > > > Is this a generic issue of specific of some firmware version? > > > > Asking since the driver as you know is supporting multiple Wi-Fi device. > > > > > > The driver does, unfortunately the hardware does not. > > > > > > I learned this the hard way. When an accesspoint is running on uap0 > > > and you want to connect to an accesspoint on mlan0 then it won't > > > work when that accesspoint is on a different channel. > > > > > > Likewise, when you are creating an accesspoint on uap0 using channel > > > A and another one on channel B then you'll notice that both > > > accesspoints will end up using channel A. > > > > > > It took me a while to find that out. In the end I found the same > > > channel check in the nxpwifi driver. > > > > > > Sascha > > > > > > > Yes, this patch is backported from nxpwifi (same as another patch for AP > DFS mode). > > Because Mwifiex supports connect/disconnect and separate auth/assoc, I > > think I will clean up the code and create patch v2 later. > > Gna, I didn't notice that I haven't answered to my own patch, but to your > patch addressing the same problem a few hours later ;) > > Sascha > After Francesco mentioned, then I know you have the patch to fix the same issue a few hours later after this patch. I think we will commit to backport needed patches from nxpwifi. BTW, are you sure your patch can work to run AP and STA on the same channel if some wiphy parameters are setting? David
