Hi Jacobe, kernel test robot noticed the following build errors: [auto build test ERROR on dabcfd5e116800496eb9bec2ba7c015ca2043aa0] url: https://github.com/intel-lab-lkp/linux/commits/Jacobe-Zang/dt-bindings-net-wireless-brcm4329-fmac-add-pci14e4-449d/20240828-165201 base: dabcfd5e116800496eb9bec2ba7c015ca2043aa0 patch link: https://lore.kernel.org/r/20240828-wireless-mainline-v13-4-9998b19cfe7e%40wesion.com patch subject: [PATCH v13 4/5] wifi: brcmfmac: Add optional lpo clock enable support config: m68k-allmodconfig (https://download.01.org/0day-ci/archive/20240830/202408300052.uYcuFzk0-lkp@xxxxxxxxx/config) compiler: m68k-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240830/202408300052.uYcuFzk0-lkp@xxxxxxxxx/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@xxxxxxxxx> | Closes: https://lore.kernel.org/oe-kbuild-all/202408300052.uYcuFzk0-lkp@xxxxxxxxx/ All error/warnings (new ones prefixed by >>): drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_probe': >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4456:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 4456 | if (!bus) | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4458:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 4458 | goto fail; | ^~~~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4458:17: error: label 'fail' used but not defined >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4450:34: warning: unused variable 'fwreq' [-Wunused-variable] 4450 | struct brcmf_fw_request *fwreq; | ^~~~~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4449:34: warning: unused variable 'wq' [-Wunused-variable] 4449 | struct workqueue_struct *wq; | ^~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4447:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 4447 | int ret; | ^~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: At top level: >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4461:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4461 | bus->sdiodev = sdiodev; | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4462:16: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4462 | sdiodev->bus = bus; | ^~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4463:29: error: expected declaration specifiers or '...' before '&' token 4463 | skb_queue_head_init(&bus->glom); | ^ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4464:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4464 | bus->txbound = BRCMF_TXBOUND; | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4465:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4465 | bus->rxbound = BRCMF_RXBOUND; | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4466:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4466 | bus->txminmax = BRCMF_TXMINMAX; | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4467:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4467 | bus->tx_seq = SDPCM_SEQ_WRAP - 1; | ^~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4470:9: warning: data definition has no type or storage class 4470 | wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM | WQ_HIGHPRI, | ^~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4470:9: error: type defaults to 'int' in declaration of 'wq' [-Wimplicit-int] In file included from include/linux/netdevice.h:35, from drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:12: >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4471:48: error: 'sdiodev' undeclared here (not in a function) 4471 | dev_name(&sdiodev->func1->dev)); | ^~~~~~~ include/linux/workqueue.h:524:72: note: in definition of macro 'alloc_ordered_workqueue' 524 | alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args) | ^~~~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4472:9: error: expected identifier or '(' before 'if' 4472 | if (!wq) { | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4477:9: warning: data definition has no type or storage class 4477 | brcmf_sdiod_freezer_count(sdiodev); | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4477:9: error: type defaults to 'int' in declaration of 'brcmf_sdiod_freezer_count' [-Wimplicit-int] >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4477:9: error: parameter names (without types) in function declaration [-Wdeclaration-missing-parameter-type] >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4477:9: error: conflicting types for 'brcmf_sdiod_freezer_count'; have 'int()' In file included from drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:32: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h:355:6: note: previous declaration of 'brcmf_sdiod_freezer_count' with type 'void(struct brcmf_sdio_dev *)' 355 | void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev); | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> include/linux/workqueue.h:301:9: error: expected identifier or '(' before 'do' 301 | do { \ | ^~ include/linux/workqueue.h:308:9: note: in expansion of macro '__INIT_WORK' 308 | __INIT_WORK((_work), (_func), 0) | ^~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4478:9: note: in expansion of macro 'INIT_WORK' 4478 | INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); | ^~~~~~~~~ >> include/linux/workqueue.h:305:11: error: expected identifier or '(' before 'while' 305 | } while (0) | ^~~~~ include/linux/workqueue.h:308:9: note: in expansion of macro '__INIT_WORK' 308 | __INIT_WORK((_work), (_func), 0) | ^~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4478:9: note: in expansion of macro 'INIT_WORK' 4478 | INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); | ^~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4479:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token 4479 | bus->brcmf_wq = wq; | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4482:9: warning: data definition has no type or storage class 4482 | ret = brcmf_sdio_probe_attach(bus); | ^~~ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4482:9: error: type defaults to 'int' in declaration of 'ret' [-Wimplicit-int] >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4482:39: error: 'bus' undeclared here (not in a function) 4482 | ret = brcmf_sdio_probe_attach(bus); | ^~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4483:9: error: expected identifier or '(' before 'if' 4483 | if (ret < 0) { | ^~ In file included from include/linux/sched.h:2148, from include/linux/kthread.h:6, from drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:9: >> include/linux/spinlock.h:332:1: error: expected identifier or '(' before 'do' 332 | do { \ | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4488:9: note: in expansion of macro 'spin_lock_init' 4488 | spin_lock_init(&bus->rxctl_lock); | ^~~~~~~~~~~~~~ >> include/linux/spinlock.h:337:3: error: expected identifier or '(' before 'while' 337 | } while (0) | ^~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4488:9: note: in expansion of macro 'spin_lock_init' 4488 | spin_lock_init(&bus->rxctl_lock); | ^~~~~~~~~~~~~~ include/linux/spinlock.h:332:1: error: expected identifier or '(' before 'do' 332 | do { \ | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4489:9: note: in expansion of macro 'spin_lock_init' 4489 | spin_lock_init(&bus->txq_lock); | ^~~~~~~~~~~~~~ include/linux/spinlock.h:337:3: error: expected identifier or '(' before 'while' 337 | } while (0) | ^~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4489:9: note: in expansion of macro 'spin_lock_init' 4489 | spin_lock_init(&bus->txq_lock); | ^~~~~~~~~~~~~~ In file included from include/linux/sysctl.h:27, from include/net/net_namespace.h:12, from include/linux/netdevice.h:38: include/linux/wait.h:65:9: error: expected identifier or '(' before 'do' 65 | do { \ | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4490:9: note: in expansion of macro 'init_waitqueue_head' 4490 | init_waitqueue_head(&bus->ctrl_wait); | ^~~~~~~~~~~~~~~~~~~ include/linux/wait.h:69:11: error: expected identifier or '(' before 'while' 69 | } while (0) | ^~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4490:9: note: in expansion of macro 'init_waitqueue_head' 4490 | init_waitqueue_head(&bus->ctrl_wait); | ^~~~~~~~~~~~~~~~~~~ include/linux/wait.h:65:9: error: expected identifier or '(' before 'do' 65 | do { \ | ^~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4491:9: note: in expansion of macro 'init_waitqueue_head' 4491 | init_waitqueue_head(&bus->dcmd_resp_wait); | ^~~~~~~~~~~~~~~~~~~ include/linux/wait.h:69:11: error: expected identifier or '(' before 'while' 69 | } while (0) | ^~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4491:9: note: in expansion of macro 'init_waitqueue_head' 4491 | init_waitqueue_head(&bus->dcmd_resp_wait); | ^~~~~~~~~~~~~~~~~~~ In file included from include/linux/netdevice.h:24: include/linux/timer.h:105:24: error: expected declaration specifiers or '...' before '(' token 105 | init_timer_key((_timer), (_fn), (_flags), NULL, NULL) | ^ include/linux/timer.h:121:9: note: in expansion of macro '__init_timer' 121 | __init_timer((timer), (callback), (flags)) | ^~~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4494:9: note: in expansion of macro 'timer_setup' 4494 | timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); | ^~~~~~~~~~~ include/linux/timer.h:105:34: error: expected declaration specifiers or '...' before '(' token 105 | init_timer_key((_timer), (_fn), (_flags), NULL, NULL) | ^ include/linux/timer.h:121:9: note: in expansion of macro '__init_timer' 121 | __init_timer((timer), (callback), (flags)) | ^~~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4494:9: note: in expansion of macro 'timer_setup' 4494 | timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); | ^~~~~~~~~~~ include/linux/timer.h:105:41: error: expected declaration specifiers or '...' before '(' token 105 | init_timer_key((_timer), (_fn), (_flags), NULL, NULL) | ^ include/linux/timer.h:121:9: note: in expansion of macro '__init_timer' 121 | __init_timer((timer), (callback), (flags)) | ^~~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4494:9: note: in expansion of macro 'timer_setup' 4494 | timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); | ^~~~~~~~~~~ In file included from include/uapi/linux/posix_types.h:5, from include/uapi/linux/types.h:14, from include/linux/types.h:6, from drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:6: include/linux/stddef.h:8:14: error: expected declaration specifiers or '...' before '(' token 8 | #define NULL ((void *)0) | ^ include/linux/timer.h:105:51: note: in expansion of macro 'NULL' 105 | init_timer_key((_timer), (_fn), (_flags), NULL, NULL) | ^~~~ include/linux/timer.h:121:9: note: in expansion of macro '__init_timer' 121 | __init_timer((timer), (callback), (flags)) | ^~~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4494:9: note: in expansion of macro 'timer_setup' 4494 | timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); | ^~~~~~~~~~~ include/linux/stddef.h:8:14: error: expected declaration specifiers or '...' before '(' token 8 | #define NULL ((void *)0) | ^ include/linux/timer.h:105:57: note: in expansion of macro 'NULL' 105 | init_timer_key((_timer), (_fn), (_flags), NULL, NULL) | ^~~~ include/linux/timer.h:121:9: note: in expansion of macro '__init_timer' 121 | __init_timer((timer), (callback), (flags)) | ^~~~~~~~~~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:4494:9: note: in expansion of macro 'timer_setup' 4494 | timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); | ^~~~~~~~~~~ vim +/fail +4458 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c 2baa3aaee27f13 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4444 82d7f3c10cf41c drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2013-12-12 4445 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4446 { 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4447 int ret; e92eedf4e080fc drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2011-11-22 4448 struct brcmf_sdio *bus; 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 @4449 struct workqueue_struct *wq; d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 @4450 struct brcmf_fw_request *fwreq; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4451 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4452 brcmf_dbg(TRACE, "Enter\n"); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4453 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4454 /* Allocate private bus interface state */ dcb77f854ae086 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Erick Archer 2024-05-27 4455 bus = kzalloc(sizeof(*bus), GFP_ATOMIC); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4456 if (!bus) b3e8126eb4c102 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Jacobe Zang 2024-08-28 4457 ret = -ENOMEM; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4458 goto fail; b3e8126eb4c102 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Jacobe Zang 2024-08-28 4459 } 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4460 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4461 bus->sdiodev = sdiodev; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4462 sdiodev->bus = bus; b83db862ffb871 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-19 @4463 skb_queue_head_init(&bus->glom); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4464 bus->txbound = BRCMF_TXBOUND; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4465 bus->rxbound = BRCMF_RXBOUND; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4466 bus->txminmax = BRCMF_TXMINMAX; 6bc52319c2c688 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2013-08-10 @4467 bus->tx_seq = SDPCM_SEQ_WRAP - 1; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4468 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 4469 /* single-threaded workqueue */ 41b637bac0b0a9 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Sean Anderson 2021-08-02 @4470 wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM | WQ_HIGHPRI, c9aa7a91de740c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-01-09 @4471 dev_name(&sdiodev->func1->dev)); 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 @4472 if (!wq) { 5e8149f5036afe drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2012-12-07 4473 brcmf_err("insufficient memory to create txworkqueue\n"); b3e8126eb4c102 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Jacobe Zang 2024-08-28 4474 ret = -ENOMEM; 37ac5780e08e4e drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Hante Meuleman 2012-11-14 4475 goto fail; 37ac5780e08e4e drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Hante Meuleman 2012-11-14 4476 } 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 @4477 brcmf_sdiod_freezer_count(sdiodev); 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 @4478 INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 @4479 bus->brcmf_wq = wq; 37ac5780e08e4e drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Hante Meuleman 2012-11-14 4480 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4481 /* attempt to attach to the dongle */ b3e8126eb4c102 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Jacobe Zang 2024-08-28 @4482 ret = brcmf_sdio_probe_attach(bus); b3e8126eb4c102 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Jacobe Zang 2024-08-28 4483 if (ret < 0) { 82d7f3c10cf41c drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2013-12-12 4484 brcmf_err("brcmf_sdio_probe_attach failed\n"); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4485 goto fail; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4486 } 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4487 dd43a01c5cdb81 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2012-11-05 4488 spin_lock_init(&bus->rxctl_lock); fed7ec44e7ef64 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Hante Meuleman 2014-03-15 4489 spin_lock_init(&bus->txq_lock); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4490 init_waitqueue_head(&bus->ctrl_wait); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4491 init_waitqueue_head(&bus->dcmd_resp_wait); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4492 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4493 /* Set up the watchdog timer */ e99e88a9d2b067 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Kees Cook 2017-10-16 4494 timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4495 /* Initialize watchdog thread */ 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4496 init_completion(&bus->watchdog_wait); 82d7f3c10cf41c drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2013-12-12 4497 bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread, 9982464379e81e drivers/net/wireless/brcm80211/brcmfmac/sdio.c Arend van Spriel 2015-02-06 4498 bus, "brcmf_wdog/%s", c9aa7a91de740c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-01-09 4499 dev_name(&sdiodev->func1->dev)); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4500 if (IS_ERR(bus->watchdog_tsk)) { 02f77195db6ce2 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Joe Perches 2012-01-15 4501 pr_warn("brcmf_watchdog thread failed to start\n"); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4502 bus->watchdog_tsk = NULL; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4503 } 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4504 /* Initialize DPC thread */ 2c64e16d1ff122 drivers/net/wireless/brcm80211/brcmfmac/sdio.c Hante Meuleman 2015-03-18 4505 bus->dpc_triggered = false; 2c64e16d1ff122 drivers/net/wireless/brcm80211/brcmfmac/sdio.c Hante Meuleman 2015-03-18 4506 bus->dpc_running = false; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4507 706478cba54458 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2013-08-10 4508 /* default sdio bus header length for tx packet */ 706478cba54458 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2013-08-10 4509 bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; 706478cba54458 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2013-08-10 4510 7dd3abc14f94bc drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Daniel Kim 2014-05-27 4511 /* Query the F2 block size, set roundup accordingly */ c9aa7a91de740c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-01-09 4512 bus->blocksize = bus->sdiodev->func2->cur_blksize; 7dd3abc14f94bc drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Daniel Kim 2014-05-27 @4513 bus->roundup = min(max_roundup, bus->blocksize); 7dd3abc14f94bc drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Daniel Kim 2014-05-27 4514 c9aa7a91de740c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-01-09 @4515 sdio_claim_host(bus->sdiodev->func1); fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4516 fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4517 /* Disable F2 to clear any intermediate frame state on the dongle */ c9aa7a91de740c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-01-09 4518 sdio_disable_func(bus->sdiodev->func2); fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4519 fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4520 bus->rxflow = false; fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4521 fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4522 /* Done with backplane-dependent accesses, can drop clock... */ 71bd508d7ded8c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Ian Molton 2017-12-08 4523 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4524 c9aa7a91de740c drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-01-09 4525 sdio_release_host(bus->sdiodev->func1); fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4526 fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4527 /* ...and initialize clock/power states */ fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4528 bus->clkstate = CLK_SDONLY; fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4529 bus->idletime = BRCMF_IDLE_INTERVAL; fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4530 bus->idleclock = BRCMF_IDLE_ACTIVE; fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4531 fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4532 /* SR state */ fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4533 bus->sr_enabled = false; fad132285081c1 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-01-06 4534 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4535 brcmf_dbg(INFO, "completed!!\n"); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4536 2baa3aaee27f13 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 @4537 fwreq = brcmf_sdio_prepare_fw_request(bus); d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4538 if (!fwreq) { d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4539 ret = -ENOMEM; d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4540 goto fail; d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4541 } d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4542 d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 @4543 ret = brcmf_fw_get_firmwares(sdiodev->dev, fwreq, bd0e1b1d380efe drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-05-27 4544 brcmf_sdio_firmware_callback); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4545 if (ret != 0) { bd0e1b1d380efe drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2014-05-27 4546 brcmf_err("async firmware request failed: %d\n", ret); d09ae51a4b6761 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Arend Van Spriel 2018-03-22 4547 kfree(fwreq); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4548 goto fail; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4549 } 15d45b6fbd01ec drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Franky Lin 2011-10-21 4550 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4551 return bus; 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4552 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4553 fail: 9fbe2a6dc71d85 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2013-12-12 4554 brcmf_sdio_remove(bus); b3e8126eb4c102 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c Jacobe Zang 2024-08-28 4555 return ERR_PTR(ret); 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 @4556 } 5b435de0d78686 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c Arend van Spriel 2011-10-05 4557 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
