DIG standing for dynamic initial gain is used for receiving coverage. With better setting, it will have better ability to receive packets. Otherwise, higher false alarm causes missing packets. The second patch is to use frequency domain RSSI, which is higher accuracy than original one. Since TX rate algorithm is also related to RSSI, this can improve TX performance as well. Eric Huang (2): wifi: rtw89: adjust DIG threshold to reduce false alarm wifi: rtw89: use frequency domain RSSI drivers/net/wireless/realtek/rtw89/core.c | 73 ++++++++++++++++++- drivers/net/wireless/realtek/rtw89/core.h | 17 +++++ drivers/net/wireless/realtek/rtw89/phy.c | 27 ++++--- drivers/net/wireless/realtek/rtw89/rtw8851b.c | 1 + drivers/net/wireless/realtek/rtw89/rtw8852a.c | 1 + drivers/net/wireless/realtek/rtw89/rtw8852b.c | 1 + .../wireless/realtek/rtw89/rtw8852b_common.c | 14 ++++ .../wireless/realtek/rtw89/rtw8852b_common.h | 9 +++ .../net/wireless/realtek/rtw89/rtw8852bt.c | 1 + drivers/net/wireless/realtek/rtw89/rtw8852c.c | 1 + drivers/net/wireless/realtek/rtw89/rtw8922a.c | 33 +++++++++ drivers/net/wireless/realtek/rtw89/txrx.h | 59 ++++++++++++++- 12 files changed, 226 insertions(+), 11 deletions(-) -- 2.25.1
