Search Linux Wireless

[PATCH v3 2/5] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do not use wilc_get_chipid() outside of wlan.c . Instead, call
wilc_get_chipid() right after the SDIO/SPI interface has been
initialized to cache the device chipid, and then use the cached
chipid throughout the driver. Make wilc_get_chipid() static and
remove its prototype from wlan.h . Make wilc_get_chipid() return
a proper return value instead of a chipid.

Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Adham Abozaeid <adham.abozaeid@xxxxxxxxxxxxx>
Cc: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
Cc: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
Cc: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Eric Dumazet <edumazet@xxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Marek Vasut <marex@xxxxxxx>
Cc: Paolo Abeni <pabeni@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
---
V2: New patch
V3: - Undo setup in wilc_wlan_init() if chip is neither wilc1000 or wilc3000
    - Make wilc_get_chipid() return proper return value
---
 .../net/wireless/microchip/wilc1000/sdio.c    | 13 ----
 .../net/wireless/microchip/wilc1000/wlan.c    | 74 +++++++++++--------
 .../net/wireless/microchip/wilc1000/wlan.h    |  1 -
 3 files changed, 43 insertions(+), 45 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 41122199d51eb..90357c89ae29b 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -671,7 +671,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
 	struct wilc_sdio *sdio_priv = wilc->bus_data;
 	struct sdio_cmd52 cmd;
 	int loop, ret;
-	u32 chipid;
 
 	/**
 	 *      function 0 csa enable
@@ -760,18 +759,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
 		return ret;
 	}
 
-	/**
-	 *      make sure can read back chip id correctly
-	 **/
-	if (!resume) {
-		ret = wilc_sdio_read_reg(wilc, WILC_CHIPID, &chipid);
-		if (ret) {
-			dev_err(&func->dev, "Fail cmd read chip id...\n");
-			return ret;
-		}
-		dev_err(&func->dev, "chipid (%08x)\n", chipid);
-	}
-
 	sdio_priv->isinit = true;
 	return 0;
 }
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 533939e71534a..5b7dd37267de0 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -1402,9 +1402,37 @@ int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 	return ret;
 }
 
+static int wilc_get_chipid(struct wilc *wilc)
+{
+	u32 chipid = 0;
+	u32 rfrevid = 0;
+
+	if (wilc->chipid == 0) {
+		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
+		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
+					     &rfrevid);
+		if (!is_wilc1000(chipid)) {
+			wilc->chipid = 0;
+			return -EINVAL;
+		}
+		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
+			if (rfrevid != 0x1)
+				chipid = WILC_1000_BASE_ID_2A_REV1;
+		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
+			if (rfrevid == 0x4)
+				chipid = WILC_1000_BASE_ID_2B_REV1;
+			else if (rfrevid != 0x3)
+				chipid = WILC_1000_BASE_ID_2B_REV2;
+		}
+
+		wilc->chipid = chipid;
+	}
+
+	return 0;
+}
+
 static int init_chip(struct net_device *dev)
 {
-	u32 chipid;
 	u32 reg;
 	int ret = 0;
 	struct wilc_vif *vif = netdev_priv(dev);
@@ -1412,9 +1440,11 @@ static int init_chip(struct net_device *dev)
 
 	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 
-	chipid = wilc_get_chipid(wilc, true);
+	ret = wilc_get_chipid(wilc);
+	if (ret)
+		goto release;
 
-	if ((chipid & 0xfff) != 0xa0) {
+	if ((wilc->chipid & 0xfff) != 0xa0) {
 		ret = wilc->hif_func->hif_read_reg(wilc,
 						   WILC_CORTUS_RESET_MUX_SEL,
 						   &reg);
@@ -1445,34 +1475,6 @@ static int init_chip(struct net_device *dev)
 	return ret;
 }
 
-u32 wilc_get_chipid(struct wilc *wilc, bool update)
-{
-	u32 chipid = 0;
-	u32 rfrevid = 0;
-
-	if (wilc->chipid == 0 || update) {
-		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
-		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
-					     &rfrevid);
-		if (!is_wilc1000(chipid)) {
-			wilc->chipid = 0;
-			return wilc->chipid;
-		}
-		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
-			if (rfrevid != 0x1)
-				chipid = WILC_1000_BASE_ID_2A_REV1;
-		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
-			if (rfrevid == 0x4)
-				chipid = WILC_1000_BASE_ID_2B_REV1;
-			else if (rfrevid != 0x3)
-				chipid = WILC_1000_BASE_ID_2B_REV2;
-		}
-
-		wilc->chipid = chipid;
-	}
-	return wilc->chipid;
-}
-
 int wilc_load_mac_from_nv(struct wilc *wl)
 {
 	int ret = -EINVAL;
@@ -1535,9 +1537,19 @@ int wilc_wlan_init(struct net_device *dev)
 	if (!wilc->hif_func->hif_is_init(wilc)) {
 		acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
 		ret = wilc->hif_func->hif_init(wilc, false);
+		if (!ret)
+			ret = wilc_get_chipid(wilc);
 		release_bus(wilc, WILC_BUS_RELEASE_ONLY);
 		if (ret)
 			goto fail;
+
+		if (!is_wilc1000(wilc->chipid)) {
+			netdev_err(dev, "Unsupported chipid: %x\n", wilc->chipid);
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		netdev_dbg(dev, "chipid (%08x)\n", wilc->chipid);
 	}
 
 	if (!wilc->vmm_table)
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index dd2fb3c2f06a2..ae187192a79c6 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -443,6 +443,5 @@ void chip_wakeup(struct wilc *wilc);
 int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
-u32 wilc_get_chipid(struct wilc *wilc, bool update);
 int wilc_load_mac_from_nv(struct wilc *wilc);
 #endif
-- 
2.45.2





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux