From: Howard Hsu <howard-yh.hsu@xxxxxxxxxxxx> Configure correct bf number and bitmap in beamforming mcu command for mt7992 chipsets, which only support dual-band. Signed-off-by: Howard Hsu <howard-yh.hsu@xxxxxxxxxxxx> Signed-off-by: Shayne Chen <shayne.chen@xxxxxxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c index daef014954d0..238b1f78ff7c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c @@ -3923,8 +3923,9 @@ int mt7996_mcu_set_txbf(struct mt7996_dev *dev, u8 action) tlv = mt7996_mcu_add_uni_tlv(skb, action, sizeof(*req_mod_en)); req_mod_en = (struct bf_mod_en_ctrl *)tlv; - req_mod_en->bf_num = 3; - req_mod_en->bf_bitmap = GENMASK(2, 0); + req_mod_en->bf_num = mt7996_band_valid(dev, MT_BAND2) ? 3 : 2; + req_mod_en->bf_bitmap = mt7996_band_valid(dev, MT_BAND2) ? + GENMASK(2, 0) : GENMASK(1, 0); break; } default: -- 2.39.2
