Search Linux Wireless

[RFC PATCH 05/18] wifi: ath12k: add ath12k_hw_regs for IPQ5332

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: P Praneesh <quic_ppranees@xxxxxxxxxxx>

Add register addresses (ath12k_hw_regs) for new ath12k AHB based
WiFi device IPQ5332.

Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1

Signed-off-by: P Praneesh <quic_ppranees@xxxxxxxxxxx>
Co-developed-by: Balamurugan S <quic_bselvara@xxxxxxxxxxx>
Signed-off-by: Balamurugan S <quic_bselvara@xxxxxxxxxxx>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/hw.c | 86 +++++++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index 7944be6a9973..d1c0227cc212 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -777,6 +777,90 @@ static const struct ath12k_hw_regs qcn9274_v2_regs = {
 	.hal_umac_ce1_dest_reg_base = 0x01b83000,
 };
 
+static const struct ath12k_hw_regs ipq5332_regs = {
+	/* SW2TCL(x) R0 ring configuration address */
+	.hal_tcl1_ring_id = 0x00000918,
+	.hal_tcl1_ring_misc = 0x00000920,
+	.hal_tcl1_ring_tp_addr_lsb = 0x0000092c,
+	.hal_tcl1_ring_tp_addr_msb = 0x00000930,
+	.hal_tcl1_ring_consumer_int_setup_ix0 = 0x00000940,
+	.hal_tcl1_ring_consumer_int_setup_ix1 = 0x00000944,
+	.hal_tcl1_ring_msi1_base_lsb = 0x00000958,
+	.hal_tcl1_ring_msi1_base_msb = 0x0000095c,
+	.hal_tcl1_ring_base_lsb = 0x00000910,
+	.hal_tcl1_ring_base_msb = 0x00000914,
+	.hal_tcl1_ring_msi1_data = 0x00000960,
+	.hal_tcl2_ring_base_lsb = 0x00000988,
+	.hal_tcl_ring_base_lsb = 0x00000b68,
+
+	/* TCL STATUS ring address */
+	.hal_tcl_status_ring_base_lsb = 0x00000d48,
+
+	/* REO DEST ring address */
+	.hal_reo2_ring_base = 0x00000578,
+	.hal_reo1_misc_ctrl_addr = 0x00000b9c,
+	.hal_reo1_sw_cookie_cfg0 = 0x0000006c,
+	.hal_reo1_sw_cookie_cfg1 = 0x00000070,
+	.hal_reo1_qdesc_lut_base0 = 0x00000074,
+	.hal_reo1_qdesc_lut_base1 = 0x00000078,
+	.hal_reo1_ring_base_lsb = 0x00000500,
+	.hal_reo1_ring_base_msb = 0x00000504,
+	.hal_reo1_ring_id = 0x00000508,
+	.hal_reo1_ring_misc = 0x00000510,
+	.hal_reo1_ring_hp_addr_lsb = 0x00000514,
+	.hal_reo1_ring_hp_addr_msb = 0x00000518,
+	.hal_reo1_ring_producer_int_setup = 0x00000524,
+	.hal_reo1_ring_msi1_base_lsb = 0x00000548,
+	.hal_reo1_ring_msi1_base_msb = 0x0000054C,
+	.hal_reo1_ring_msi1_data = 0x00000550,
+	.hal_reo1_aging_thres_ix0 = 0x00000B28,
+	.hal_reo1_aging_thres_ix1 = 0x00000B2C,
+	.hal_reo1_aging_thres_ix2 = 0x00000B30,
+	.hal_reo1_aging_thres_ix3 = 0x00000B34,
+
+	/* REO Exception ring address */
+	.hal_reo2_sw0_ring_base = 0x000008c0,
+
+	/* REO Reinject ring address */
+	.hal_sw2reo_ring_base = 0x00000320,
+	.hal_sw2reo1_ring_base = 0x00000398,
+
+	/* REO cmd ring address */
+	.hal_reo_cmd_ring_base = 0x000002A8,
+
+	/* REO status ring address */
+	.hal_reo_status_ring_base = 0x00000aa0,
+
+	/* WBM idle link ring address */
+	.hal_wbm_idle_ring_base_lsb = 0x00000d3c,
+	.hal_wbm_idle_ring_misc_addr = 0x00000d4c,
+	.hal_wbm_r0_idle_list_cntl_addr = 0x00000240,
+	.hal_wbm_r0_idle_list_size_addr = 0x00000244,
+	.hal_wbm_scattered_ring_base_lsb = 0x00000250,
+	.hal_wbm_scattered_ring_base_msb = 0x00000254,
+	.hal_wbm_scattered_desc_head_info_ix0 = 0x00000260,
+	.hal_wbm_scattered_desc_head_info_ix1   = 0x00000264,
+	.hal_wbm_scattered_desc_tail_info_ix0 = 0x00000270,
+	.hal_wbm_scattered_desc_tail_info_ix1 = 0x00000274,
+	.hal_wbm_scattered_desc_ptr_hp_addr = 0x0000027c,
+
+	/* SW2WBM release ring address */
+	.hal_wbm_sw_release_ring_base_lsb = 0x0000037c,
+
+	/* WBM2SW release ring address */
+	.hal_wbm0_release_ring_base_lsb = 0x00000e08,
+	.hal_wbm1_release_ring_base_lsb = 0x00000e80,
+
+	/* PPE release ring address */
+	.hal_ppe_rel_ring_base = 0x0000046c,
+
+	/* CE base address */
+	.hal_umac_ce0_src_reg_base = 0x00740000,
+	.hal_umac_ce0_dest_reg_base = 0x00741000,
+	.hal_umac_ce1_src_reg_base = 0x00742000,
+	.hal_umac_ce1_dest_reg_base = 0x00743000,
+};
+
 static const struct ath12k_hw_regs wcn7850_regs = {
 	/* SW2TCL(x) R0 ring configuration address */
 	.hal_tcl1_ring_id = 0x00000908,
@@ -1123,7 +1207,7 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.internal_sleep_clock = false,
 
 		.hw_ops = &qcn9274_ops,
-		.regs = NULL,
+		.regs = &ipq5332_regs,
 		.ring_mask = NULL,
 
 		.host_ce_config = NULL,
-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux