I have a sinus 154 data usb adapter, which used to work w/ p54 in 2.6.27: > Dec 13 13:21:30 kernel: usb 1-7: new high speed USB device using ehci_hcd and address 22 > Dec 13 13:21:31 kernel: usb 1-7: configuration #1 chosen from 1 choice > Dec 13 13:21:31 kernel: firmware: requesting isl3890usb > Dec 13 13:21:31 kernel: p54: LM86 firmware > Dec 13 13:21:31 kernel: p54: FW rev 2.5.6.0 - Softmac protocol 3.0 > Dec 13 13:21:33 kernel: p54: unknown eeprom code : 0x1 > Dec 13 13:21:33 kernel: p54: unknown eeprom code : 0x3 > Dec 13 13:21:33 kernel: p54: unknown eeprom code : 0x1905 > Dec 13 13:21:33 kernel: p54: unknown eeprom code : 0x1007 > Dec 13 13:21:33 kernel: p54: unknown eeprom code : 0x1008 > Dec 13 13:21:33 kernel: p54: unknown eeprom code : 0x1100 > Dec 13 13:21:33 kernel: phy9: Selected rate control algorithm 'pid' > Dec 13 13:21:33 kernel: phy9: hwaddr 00:30:f1:12:34:56, isl3886 > Dec 13 13:21:33 kernel: udev: renamed network interface wlan0 to wlan1 > Dec 13 13:21:33 kernel: usb 1-7: New USB device found, idVendor=0846, idProduct=4200 > Dec 13 13:21:33 kernel: usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 but does not work w/ current wireless-testing.git/pending: > Dec 15 17:43:17 kernel: usb 1-7: new high speed USB device using ehci_hcd and address 29 > Dec 15 17:43:17 kernel: usb 1-7: configuration #1 chosen from 1 choice > Dec 15 17:43:17 kernel: usb 1-7: firmware: requesting isl3886usb > Dec 15 17:43:17 kernel: phy16: p54 detected a LM86 firmware > Dec 15 17:43:17 kernel: phy16: FW rev 2.5.6.0 - Softmac protocol 3.0 > Dec 15 17:43:17 kernel: phy16: you are using an obsolete firmware. visit http://wireless.kernel.org/en/users/Drivers/p54 and grab one for "kernel >= 2.6.28"! > Dec 15 17:43:17 kernel: phy16: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:no > Dec 15 17:43:20 kernel: phy16: device does not respond! > Dec 15 17:43:20 kernel: p54usb: probe of 1-7:1.0 failed with error -16 > Dec 15 17:43:20 kernel: usb 1-7: New USB device found, idVendor=0846, idProduct=4200 > Dec 15 17:43:20 kernel: usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Using different firmwares only changes the cryptographic-accelerator line (CCMP:yes) [1], but i still get the "device does not respond!" error. artur > Dec 15 17:06:29 kernel: usb 1-7: new high speed USB device using ehci_hcd and address 17 > Dec 15 17:06:29 kernel: usb 1-7: configuration #1 chosen from 1 choice > Dec 15 17:06:29 kernel: usb 1-7: firmware: requesting isl3886usb > Dec 15 17:06:30 kernel: phy4: p54 detected a LM86 firmware > Dec 15 17:06:30 kernel: phy4: FW rev 2.13.1.0 - Softmac protocol 5.5 > Dec 15 17:06:30 kernel: phy4: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > Dec 15 17:06:32 kernel: phy4: device does not respond! > Dec 15 17:06:32 kernel: p54usb: probe of 1-7:1.0 failed with error -16 > Dec 15 17:06:32 kernel: usb 1-7: New USB device found, idVendor=0846, idProduct=4200 > Dec 15 17:06:32 kernel: usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
