SALVATORE BUONO <tottobuono@xxxxxxxxx> writes: > Good morning, there is a problem with this driver with new version of > ubuntu, since before I update to 24.04 it works correctly, but now it does > not work anymore after sleep/suspension. It disconnects and I tried a lot > of commands to restart the wifi module but it does not work. This is the > discussion on ubuntu forum, but no solution is found. Can you fix it? > > > *Salvatore Buono* > salvatore@salvatore-Inspiron-5515:~$ sudo dmesg | grep ath10k > [ 3.509206] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) > [ 3.511043] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 > [ 3.734071] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310 > [ 3.734081] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 > [ 3.734432] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 > [ 3.799439] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 > [ 3.881223] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 > [ 5.804589] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 > [ 394.964239] ath10k_pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b address=0xfb294f50 flags=0x0070] > [ 402.843038] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 > [ 403.045772] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310 > [ 403.045788] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 > [ 403.046353] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 > [ 403.110616] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 > [ 403.197531] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 > [ 403.259722] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 > [ 418.545075] ath10k_pci 0000:02:00.0: timed out waiting peer stats info > [ 423.537127] ath10k_pci 0000:02:00.0: wmi command 90113 timeout, restarting hardware > [ 423.537147] ath10k_pci 0000:02:00.0: could not request stats (-11) > [ 423.549132] ath10k_pci 0000:02:00.0: could not request peer stats info: -108 > [ 423.559691] ath10k_pci 0000:02:00.0: failed to read hi_board_data address: -16 > [ 426.587606] ath10k_pci 0000:02:00.0: failed to receive initialized event from target: 00000000 > [ 429.603807] ath10k_pci 0000:02:00.0: failed to receive initialized event from target: 00000000 > [ 429.603824] ath10k_pci 0000:02:00.0: failed to wait for target init: -110 > [ 429.606647] ath10k_pci 0000:02:00.0: failed to delete WMI vdev 1: -108 > [ 429.606657] ath10k_pci 0000:02:00.0: failed to set 2g txpower 46: -108 > [ 429.606661] ath10k_pci 0000:02:00.0: failed to setup tx power 23: -108 > [ 429.606664] ath10k_pci 0000:02:00.0: failed to recalc tx power: -108 > [ 429.606855] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000 > [ 429.606898] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000 You need to report this to Ubuntu. We don't support distro kernels, only vanilla kernel.org releases. Adding also ath10k list. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
