Add support for channel 177 (5885 MHz ) for the 5 GHz band.
Tested-on: qca988x hw2.0 firmware ver 10.2.4-1.0-00047
Signed-off-by: Paweł Owoc <frut3k7@xxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/core.h | 4 ++--
drivers/net/wireless/ath/ath10k/mac.c | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 446dca74f06a..3dff8c028526 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -39,8 +39,8 @@
#define WMI_READY_TIMEOUT (5 * HZ)
#define ATH10K_FLUSH_TIMEOUT_HZ (5 * HZ)
#define ATH10K_CONNECTION_LOSS_HZ (3 * HZ)
-#define ATH10K_NUM_CHANS 41
-#define ATH10K_MAX_5G_CHAN 173
+#define ATH10K_NUM_CHANS 42
+#define ATH10K_MAX_5G_CHAN 177
/* Antenna noise floor */
#define ATH10K_DEFAULT_NOISE_FLOOR -95
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a5da32e87106..aabe70fcd065 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -9543,6 +9543,7 @@ static const struct ieee80211_channel ath10k_5ghz_channels[] = {
CHAN5G(165, 5825, 0),
CHAN5G(169, 5845, 0),
CHAN5G(173, 5865, 0),
+ CHAN5G(177, 5885, 0),
/* If you add more, you may need to change ATH10K_MAX_5G_CHAN */
/* And you will definitely need to change ATH10K_NUM_CHANS in core.h */
};
--
2.45.2
