On Mon, 2024-07-22 at 13:50 +0300, Bitterblue Smith wrote: > "iw dev wlp2s0 station dump" shows incorrect rx bitrate: > > tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 > rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1 > > This is because the RX band width is calculated incorrectly. Fix the > calculation according to the phydm_rxsc_2_bw() function from the > official drivers. > > After: > > tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 > rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1 > > It also works correctly with the AP configured for 20 MHz and 40 MHz. > > Tested with RTL8822CE. > > Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> > --- > v2: > - Use Fixes instead of Cc: stable. > For the record, if you want it backported, you really should have _both_. Having the Fixes: is good, but will not necessarily lead to it being backported when/where you want it. johannes