In supported_vht_mcs_rate_nss2, the rate for MCS9 & VHT20 is defined as
{1560, 1733}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 1730 100kbps nss 2 mcs 9
and:
invalid vht params rate 1920 100kbps nss 2 mcs 9
Change it to {1730, 1920} to align with firmware, so this issue could be
fixed.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: 3344b99d69ab ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@xxxxxxxxxxxxx/
Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3c34f3d8e555..e62b251405fc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -9136,7 +9136,7 @@ static const struct ath10k_index_vht_data_rate_type supported_vht_mcs_rate_nss2[
{6, {5265, 5850}, {2430, 2700}, {1170, 1300} },
{7, {5850, 6500}, {2700, 3000}, {1300, 1444} },
{8, {7020, 7800}, {3240, 3600}, {1560, 1733} },
- {9, {7800, 8667}, {3600, 4000}, {1560, 1733} }
+ {9, {7800, 8667}, {3600, 4000}, {1730, 1920} }
};
static void ath10k_mac_get_rate_flags_ht(struct ath10k *ar, u32 rate, u8 nss, u8 mcs,
--
2.25.1
