From: Sean Wang <sean.wang@xxxxxxxxxxxx> Update band_idx in per-link BSS to be auto for the MLO-enabled firmware and the MLO-enabled firmware only supports omac index in 0. The change remains compatible with the non-MLO mode and the older firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@xxxxxxxxxxxx> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@xxxxxxxxxxxx> Co-developed-by: Deren Wu <deren.wu@xxxxxxxxxxxx> Signed-off-by: Deren Wu <deren.wu@xxxxxxxxxxxx> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt7925/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c index 44d9da5aadd1..0c4e106ae735 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c @@ -333,8 +333,9 @@ static int mt7925_mac_link_bss_add(struct mt792x_dev *dev, goto out; } - mconf->mt76.omac_idx = mconf->mt76.idx; - mconf->mt76.band_idx = 0; + mconf->mt76.omac_idx = ieee80211_vif_is_mld(vif) ? + 0 : mconf->mt76.idx; + mconf->mt76.band_idx = 0xff; mconf->mt76.wmm_idx = mconf->mt76.idx % MT76_CONNAC_MAX_WMM_SETS; if (mvif->phy->mt76->chandef.chan->band != NL80211_BAND_2GHZ) -- 2.25.1
