Hello, I brought up a 40Mhz AP on 6Ghz channel-1, but my be200 radio does not see it in a scan. A second sniffer radio does see beacons on channel 1. If I move the 40Mhz AP to channel 5 (PSC channel), then be200 sees it immediately. There is a second 'real' AP in this environment that is very likely to be showing colocated SSID information in its 2.4/5G beacons. Its BSSIDs for all 3 bands show as expected. Is be200 supposed to be able to scan non PSC channels at all? I have mucked a bit with supplicant in this area, so I might have broken it, but I'm trying to understand expected behavior before I go 'fix' something else... Here are my coloc scan related patches, goal was to make it scan harder every 5 attempts in case it is not finding what it wants on the PSC channels or lower-band beacons. https://github.com/greearb/hostap-ct/commit/4d8a0808356771aa4701ce07582a722f9ca34ce2 https://github.com/greearb/hostap-ct/commit/335ef5980a85f9ddd6facc79f27b353b62ade4d1 Thanks, Ben -- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com
