For 8852BT, the initial settings of BT-coexistence is a little bit
different, so add the extra handles.
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/rtw8852b_common.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852b_common.c b/drivers/net/wireless/realtek/rtw89/rtw8852b_common.c
index f183dce16398..1745c2882acf 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852b_common.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852b_common.c
@@ -1793,6 +1793,11 @@ static void __rtw8852bx_btc_init_cfg(struct rtw89_dev *rtwdev)
rtw8852bx_set_trx_mask(rtwdev, RF_PATH_B, BTC_BT_TX_GROUP, 0x5ff);
}
+ if (rtwdev->chip->chip_id == RTL8852BT) {
+ rtw8852bx_set_trx_mask(rtwdev, RF_PATH_A, BTC_BT_RX_GROUP, 0x5df);
+ rtw8852bx_set_trx_mask(rtwdev, RF_PATH_B, BTC_BT_RX_GROUP, 0x5df);
+ }
+
/* set PTA break table */
rtw89_write32(rtwdev, R_BTC_BREAK_TABLE, BTC_BREAK_PARAM);
--
2.25.1
