Hi Peter, On Thu, Jun 20, 2024 at 7:19 PM Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > > Hi Arend, > > > After being asked about support for WPA3 for BCM43224 chipset it > > was found that all it takes is setting the MFP_CAPABLE flag and > > mac80211 will take care of all that is needed [1]. > > Testing this on a Raspberry Pi 4 [1] against a UniFi U6Pro AP I can't > connect to my WPA3 only SSID, it works fine with the SSID that's > WPA2/WPA3 on the same AP. It doesn't connect and I get a whole lot of > the following errors while it tries: > > [ 155.988865] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52 > [ 156.100906] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52 > [ 156.108597] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52 > [ 156.116317] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52 The Raspberry Pis' WiFi chipsets use the brcmfmac driver and this is a patch to the brcmsmac driver. This driver is for older and simpler WiFi chipsets than the ones on the Raspberry Pis. Thanks, -- Julian Calaby Email: julian.calaby@xxxxxxxxx Profile: http://www.google.com/profiles/julian.calaby/
