Search Linux Wireless

Re: iwlwifi: Regression after migrating to 6.6.32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Johannes,

I forgot to mention, but the Wifi device I am using is:

Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340

On Tue, Jun 11, 2024 at 10:54 AM Johannes Berg
<johannes@xxxxxxxxxxxxxxxx> wrote:

> > [    5.038174] rxb->offset is 0 trans_pcie->rx_buf_bytes is 4096
>
> so that looks pretty normal?
>
> Might be useful to see rx->page_dma too, supported_dma_mask should be
> 4095 or 2047 depending on the device, but I'm not sure how you could end
> up with a DMA mapping for a page that's not at least 11 bit aligned?

Here it goes:

[    4.344218] rxb->offset is 0 trans_pcie->rx_buf_bytes is 4096
rxb->page_dma is 4215433216 trans_pcie->supported_dma_mask is 4095
[    4.355936] WARNING: CPU: 2 PID: 135 at
/drivers/net/wireless/intel/iwlwifi/pcie/rx.c:269
iwl_pcie_rxmq_restock.part.0+0x15c/0x168 [iwlwifi]

I don't know what a typical rxb->page_dma should be.

Thanks





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux