Device is booted in factory test mode for calibration.
The commands are sent from userspace application, which
is sent to firmware using wmi commands. Firmware sends
the response to driver as wmi events and driver sends
these events to the application via netlink message.
Also added changes related to correct pdev id access for
fw test cmd.
Aaradhana Sahu (3):
wifi: ath: create common testmode_i.h file for ath drivers
wifi: ath12k: export ath12k_wmi_tlv_hdr for testmode
wifi: ath12k: add factory test mode support
Rajat Soni (1):
wifi: ath12k: Fill pdev id for fw test cmd
---
v3:
-Rebased on latest ToT
-Updated Tested-on Tag
-Removed second parameter of ath12k_core_start()
-Updated copyright
v2:
-Rebased on latest ath ToT
---
drivers/net/wireless/ath/ath11k/testmode.c | 78 ++--
drivers/net/wireless/ath/ath12k/Makefile | 1 +
drivers/net/wireless/ath/ath12k/core.c | 22 +-
drivers/net/wireless/ath/ath12k/core.h | 13 +
drivers/net/wireless/ath/ath12k/debug.h | 1 +
drivers/net/wireless/ath/ath12k/dp.c | 3 +
drivers/net/wireless/ath/ath12k/mac.c | 15 +-
drivers/net/wireless/ath/ath12k/pci.c | 1 +
drivers/net/wireless/ath/ath12k/testmode.c | 422 ++++++++++++++++++
drivers/net/wireless/ath/ath12k/testmode.h | 40 ++
drivers/net/wireless/ath/ath12k/wmi.c | 39 +-
drivers/net/wireless/ath/ath12k/wmi.h | 21 +
.../wireless/ath/{ath11k => }/testmode_i.h | 52 +--
13 files changed, 634 insertions(+), 74 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath12k/testmode.c
create mode 100644 drivers/net/wireless/ath/ath12k/testmode.h
rename drivers/net/wireless/ath/{ath11k => }/testmode_i.h (53%)
base-commit: a116bf2be795eb1db75fa6a48aa85c397be001a6
--
2.34.1
