Search Linux Wireless

Re: [PATCH v2] wifi: ath11k: fix wrong handling of CCMP256 and GCMP ciphers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Baochen Qiang <quic_bqiang@xxxxxxxxxxx> writes:

> Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key()
> IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi()
> a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers.
>
> This results in unexpected management frame drop in case either of above 3 ciphers
> is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211
> will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved
> is wrong. Such frame is dropped later by hardware:
>
> ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0
> ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1
>
>>From user point of view, we have observed very low throughput due to this issue:
> action frames are all dropped so ADDBA response from DUT never reaches AP. AP
> can not use aggregation thus throughput is low.
>
> Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper
> MIC length for those ciphers.
>
> Tested-on: WCN6855 hw2.0 PCI
> WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
> Reported-by: Yaroslav Isakov <yaroslav.isakov@xxxxxxxxx>
> Tested-by: Yaroslav Isakov <yaroslav.isakov@xxxxxxxxx>
> Closes:
> https://lore.kernel.org/all/CADS+iDX5=JtJr0apAtAQ02WWBxgOFEv8G063vuGYwDTC8AVZaw@xxxxxxxxxxxxxx
> Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
> Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>

[...]

> @@ -5927,7 +5929,10 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
>  		     ieee80211_is_deauth(hdr->frame_control) ||
>  		     ieee80211_is_disassoc(hdr->frame_control)) &&
>  		     ieee80211_has_protected(hdr->frame_control)) {
> -			skb_put(skb, IEEE80211_CCMP_MIC_LEN);
> +			WARN_ON(!(skb_cb->flags & ATH11K_SKB_CIPHER_SET));

Using WARN_ON() in the data path is not advisable as it's not rate
limited and quite spammy, in the worst case it can lead to kernel
crashing (I have experienced this even myself). ath11k_warn() is safer
in this regard so I changed it to this:

			if (!(skb_cb->flags & ATH11K_SKB_CIPHER_SET))
				ath11k_warn(ab, "WMI management tx frame without ATH11K_SKB_CIPHER_SET");

Please check:

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=aeadb08d7b4acced84a45812f1285c8cd3ed853a

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux