From: Michael Nemanov <Michael.Nemanov@xxxxxx> --- drivers/net/wireless/ti/Kconfig | 1 + drivers/net/wireless/ti/Makefile | 1 + drivers/net/wireless/ti/cc33xx/Kconfig | 24 ++++++++++++++++++++++++ drivers/net/wireless/ti/cc33xx/Makefile | 10 ++++++++++ 4 files changed, 36 insertions(+) create mode 100644 drivers/net/wireless/ti/cc33xx/Kconfig create mode 100644 drivers/net/wireless/ti/cc33xx/Makefile diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig index 3fcd9e395f72..fa7214d6018c 100644 --- a/drivers/net/wireless/ti/Kconfig +++ b/drivers/net/wireless/ti/Kconfig @@ -14,6 +14,7 @@ if WLAN_VENDOR_TI source "drivers/net/wireless/ti/wl1251/Kconfig" source "drivers/net/wireless/ti/wl12xx/Kconfig" source "drivers/net/wireless/ti/wl18xx/Kconfig" +source "drivers/net/wireless/ti/cc33xx/Kconfig" # keep last for automatic dependencies source "drivers/net/wireless/ti/wlcore/Kconfig" diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile index 05ee016594f8..9e028a91ec30 100644 --- a/drivers/net/wireless/ti/Makefile +++ b/drivers/net/wireless/ti/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_WLCORE) += wlcore/ obj-$(CONFIG_WL12XX) += wl12xx/ obj-$(CONFIG_WL1251) += wl1251/ obj-$(CONFIG_WL18XX) += wl18xx/ +obj-$(CONFIG_CC33XX) += cc33xx/ \ No newline at end of file diff --git a/drivers/net/wireless/ti/cc33xx/Kconfig b/drivers/net/wireless/ti/cc33xx/Kconfig new file mode 100644 index 000000000000..0c3ff97dacc7 --- /dev/null +++ b/drivers/net/wireless/ti/cc33xx/Kconfig @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0-only +config CC33XX + tristate "TI CC33XX support" + depends on MAC80211 + select FW_LOADER + help + This module contains the main code for TI CC33XX WLAN chips. It abstracts + hardware-specific differences among different chipset families. + Each chipset family needs to implement its own lower-level module + that will depend on this module for the common code. + + If you choose to build a module, it will be called cc33xx. Say N if + unsure. + +config CC33XX_SDIO + tristate "TI CC33XX SDIO support" + depends on CC33XX && MMC + help + This module adds support for the SDIO interface of adapters using + TI CC33XX WLAN chipsets. Select this if your platform is using + the SDIO bus. + + If you choose to build a module, it'll be called cc33xx_sdio. + Say N if unsure. diff --git a/drivers/net/wireless/ti/cc33xx/Makefile b/drivers/net/wireless/ti/cc33xx/Makefile new file mode 100644 index 000000000000..6156f778edee --- /dev/null +++ b/drivers/net/wireless/ti/cc33xx/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +cc33xx-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \ + boot.o init.o scan.o + +cc33xx_sdio-objs = sdio.o + +cc33xx-$(CONFIG_NL80211_TESTMODE) += testmode.o +obj-$(CONFIG_CC33XX) += cc33xx.o +obj-$(CONFIG_CC33XX_SDIO) += cc33xx_sdio.o -- 2.25.1
