Search Linux Wireless

Re: [RFC v3 4/8] wifi: mac80211: add support for DFS with multiple radios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07.06.24 06:25, Karthikeyan Periyasamy wrote:


On 6/6/2024 11:37 PM, Felix Fietkau wrote:
DFS can be supported with multi-channel combinations, as long as each DFS
capable radio only supports one channel.

Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
  net/mac80211/main.c | 32 ++++++++++++++++++++++++--------
  1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 40fbf397ce74..e9c4cf611e94 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c

...

  int ieee80211_register_hw(struct ieee80211_hw *hw)
  {
  	struct ieee80211_local *local = hw_to_local(hw);
@@ -1173,17 +1188,18 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
  			if (comb->num_different_channels > 1)
  				return -EINVAL;
  		}
-	} else {
-		/* DFS is not supported with multi-channel combinations yet */
-		for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
-			const struct ieee80211_iface_combination *comb;
-
-			comb = &local->hw.wiphy->iface_combinations[i];
+	} else if (hw->wiphy->n_radio) {
+		for (i = 0; i < hw->wiphy->n_radio; i++) {
+			const struct wiphy_radio *radio = &hw->wiphy->radio[i];
- if (comb->radar_detect_widths &&
-			    comb->num_different_channels > 1)
+			if (!ieee80211_ifcomb_check_radar(radio->iface_combinations,
+							  radio->n_iface_combinations))
  				return -EINVAL;
  		}
+	} else {
+		if (!ieee80211_ifcomb_check_radar(hw->wiphy->iface_combinations,
+						  hw->wiphy->n_iface_combinations))
+			return -EINVAL;
  	}
/* Only HW csum features are currently compatible with mac80211 */

Are we omitting the "wiphy->iface_combinations" if the radio specific
iface combination advertised ?

If so, it looks like unused "wiphy->iface_combinations" for radio
specific combination advertised.

This patch series assumes that you have both wiphy->iface_combinations and radio->iface_combinations set. wiphy->iface_combinations applies to the full wiphy, whereas radio->iface_combinations only applies to vifs assigned to the radio.

- Felix




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux