Kalle Valo <kvalo@xxxxxxxxxx> wrote: > Hi, > > Please pull, more information in the tag below. > > Kalle > > The following changes since commit f1c26960b6afb9c38a4019ad36392c654db6e20e: > > Merge tag 'ath-next-20240502' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath (2024-05-03 13:30:19 +0300) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git tags/ath-next-20240605 > > for you to fetch changes up to 22767241e64427bbcffea2e2d51531ab467bc4ef: > > wifi: ath12k: add hw_link_id in ath12k_pdev (2024-06-03 16:15:50 +0300) > > ---------------------------------------------------------------- > ath.git patches for v6.11 > > ath12k > > * remove unsupported tx monitor handling > > * channel 2 in 6 GHz band support > > * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support > > * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support > > * dynamic VLAN support > > * add panic handler for resetting the firmware state > > ath10k > > * add qcom,no-msa-ready-indicator Device Tree property > > * LED support for various chipsets > > ---------------------------------------------------------------- > Aloka Dixit (9): > wifi: ath12k: advertise driver capabilities for MBSSID and EMA > wifi: ath12k: configure MBSSID params in vdev create/start > wifi: ath12k: rename MBSSID fields in wmi_vdev_up_cmd > wifi: ath12k: create a structure for WMI vdev up parameters > wifi: ath12k: configure MBSSID parameters in AP mode > wifi: ath12k: refactor arvif security parameter configuration > wifi: ath12k: add MBSSID beacon support > wifi: ath12k: add EMA beacon support > wifi: ath12k: skip sending vdev down for channel switch > > Baochen Qiang (9): > wifi: ath12k: fix Smatch warnings on ath12k_core_suspend() > wifi: ath11k: refactor setting country code logic > wifi: ath11k: restore country code during resume > wifi: ath11k: fix wrong definition of CE ring's base address > wifi: ath12k: fix race due to setting ATH12K_FLAG_EXT_IRQ_ENABLED too early > wifi: ath12k: fix wrong definition of CE ring's base address > wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() > wifi: ath12k: do not process consecutive RDDM event > wifi: ath12k: add panic handler > > Breno Leitao (2): > wifi: wil6210: Do not use embedded netdev in wil6210_priv > wifi: ath12k: allocate dummy net_device dynamically > > Jeff Johnson (8): > wifi: ath11k: refactor CE remap & unmap > wifi: ath11k: unmap the CE in ath11k_ahb_probe() error path > wifi: ath12k: initialize 'ret' in ath12k_qmi_load_file_target_mem() > wifi: ath11k: initialize 'ret' in ath11k_qmi_load_file_target_mem() > wifi: ath11k: fix misspelling of "dma" in num_rxmda_per_pdev > wifi: ath12k: fix misspelling of "dma" in num_rxmda_per_pdev > wifi: ath12k: initialize 'ret' in ath12k_dp_rxdma_ring_sel_config_wcn7850() > wifi: ath12k: Fix devmem address prefix when logging > > Kalle Valo (1): > wifi: ath11k: ath11k_mac_op_ipv6_changed(): use list_for_each_entry() > > Kang Yang (5): > wifi: ath12k: remove unused variable monitor_flags > wifi: ath12k: avoid duplicated vdev stop > wifi: ath12k: avoid duplicated vdev down > wifi: ath12k: remove invalid peer create logic > wifi: ath12k: remove redundant peer delete for WCN7850 > > Karthikeyan Kathirvel (1): > wifi: ath12k: drop failed transmitted frames from metric calculation. > > Karthikeyan Periyasamy (13): > wifi: ath12k: Refactor the hardware recovery procedure > wifi: ath12k: Refactor the hardware state > wifi: ath12k: Add lock to protect the hardware state > wifi: ath12k: Replace "chip" with "device" in hal Rx return buffer manager > wifi: ath12k: Refactor idle ring descriptor setup > wifi: ath12k: Introduce device index > wifi: ath12k: add multi device support for WBM idle ring buffer setup > wifi: ath12k: avoid double SW2HW_MACID conversion > wifi: ath12k: remove duplicate definition of MAX_RADIOS > wifi: ath12k: use correct MAX_RADIOS > wifi: ath12k: refactor rx descriptor CMEM configuration > wifi: ath12k: improve the rx descriptor error information > wifi: ath12k: add hw_link_id in ath12k_pdev > > Lingbo Kong (1): > wifi: ath12k: fix ack signal strength calculation > > Marc Gonzalez (2): > dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop > wifi: ath10k: do not always wait for MSA_READY indicator > > Muna Sinada (1): > wifi: ath12k: dynamic VLAN support > > Nithyanantham Paramasivam (1): > wifi: ath12k: Fix tx completion ring (WBM2SW) setup failure > > P Praneesh (3): > wifi: ath12k: change DMA direction while mapping reinjected packets > wifi: ath12k: fix invalid memory access while processing fragmented packets > wifi: ath12k: fix firmware crash during reo reinject > > Pradeep Kumar Chitrapu (6): > wifi: ath12k: add channel 2 into 6 GHz channel list > wifi: ath12k: Correct 6 GHz frequency value in rx status > wifi: ath12k: fix survey dump collection in 6 GHz > wifi: ath12k: add 6 GHz params in peer assoc command > wifi: ath12k: refactor SMPS configuration > wifi: ath12k: support SMPS configuration for 6 GHz > > Rob Herring (Arm) (1): > dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example > > Sebastian Gottschall (1): > wifi: ath10k: add LED and GPIO controlling support for various chipsets > > Sven Eckelmann (1): > wifi: ath12k: Don't drop tx_status in failure case > > Tamizh Chelvam Raja (3): > wifi: ath12k: fix calling correct function for rx monitor mode > wifi: ath12k: Remove unsupported tx monitor handling > wifi: ath12k: Remove unused tcl_*_ring configuration > > Venkateswara Naralasetty (1): > wifi: ath11k: skip status ring entry processing > > .../bindings/net/wireless/qcom,ath10k.yaml | 5 + > .../bindings/net/wireless/qcom,ath11k.yaml | 9 - > drivers/net/wireless/ath/ath10k/Kconfig | 6 + > drivers/net/wireless/ath/ath10k/Makefile | 1 + > drivers/net/wireless/ath/ath10k/core.c | 32 ++ > drivers/net/wireless/ath/ath10k/core.h | 8 + > drivers/net/wireless/ath/ath10k/hw.h | 1 + > drivers/net/wireless/ath/ath10k/leds.c | 90 ++++ > drivers/net/wireless/ath/ath10k/leds.h | 34 ++ > drivers/net/wireless/ath/ath10k/mac.c | 1 + > drivers/net/wireless/ath/ath10k/qmi.c | 11 + > drivers/net/wireless/ath/ath10k/qmi.h | 1 + > drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++ > drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 + > drivers/net/wireless/ath/ath10k/wmi.c | 54 ++ > drivers/net/wireless/ath/ath10k/wmi.h | 35 ++ > drivers/net/wireless/ath/ath11k/ahb.c | 57 +- > drivers/net/wireless/ath/ath11k/ce.h | 6 +- > drivers/net/wireless/ath/ath11k/core.c | 49 +- > drivers/net/wireless/ath/ath11k/debugfs.c | 6 +- > drivers/net/wireless/ath/ath11k/dp.c | 12 +- > drivers/net/wireless/ath/ath11k/dp_rx.c | 104 +++- > drivers/net/wireless/ath/ath11k/dp_tx.c | 6 +- > drivers/net/wireless/ath/ath11k/hal.c | 16 +- > drivers/net/wireless/ath/ath11k/hal.h | 2 + > drivers/net/wireless/ath/ath11k/hw.h | 4 +- > drivers/net/wireless/ath/ath11k/mac.c | 19 +- > drivers/net/wireless/ath/ath11k/qmi.c | 2 +- > drivers/net/wireless/ath/ath11k/reg.c | 18 +- > drivers/net/wireless/ath/ath11k/reg.h | 4 +- > drivers/net/wireless/ath/ath11k/wmi.c | 2 +- > drivers/net/wireless/ath/ath12k/ce.h | 6 +- > drivers/net/wireless/ath/ath12k/core.c | 144 ++++-- > drivers/net/wireless/ath/ath12k/core.h | 44 +- > drivers/net/wireless/ath/ath12k/dp.c | 83 +-- > drivers/net/wireless/ath/ath12k/dp.h | 4 +- > drivers/net/wireless/ath/ath12k/dp_mon.c | 40 +- > drivers/net/wireless/ath/ath12k/dp_rx.c | 115 ++--- > drivers/net/wireless/ath/ath12k/dp_tx.c | 165 +++--- > drivers/net/wireless/ath/ath12k/dp_tx.h | 5 +- > drivers/net/wireless/ath/ath12k/hal.c | 5 +- > drivers/net/wireless/ath/ath12k/hal.h | 21 +- > drivers/net/wireless/ath/ath12k/hal_desc.h | 47 +- > drivers/net/wireless/ath/ath12k/hal_tx.h | 4 +- > drivers/net/wireless/ath/ath12k/hif.h | 9 + > drivers/net/wireless/ath/ath12k/hw.c | 23 +- > drivers/net/wireless/ath/ath12k/hw.h | 4 +- > drivers/net/wireless/ath/ath12k/mac.c | 574 ++++++++++++++++----- > drivers/net/wireless/ath/ath12k/mhi.c | 11 + > drivers/net/wireless/ath/ath12k/pci.c | 39 +- > drivers/net/wireless/ath/ath12k/pci.h | 1 + > drivers/net/wireless/ath/ath12k/qmi.c | 8 +- > drivers/net/wireless/ath/ath12k/reg.c | 19 +- > drivers/net/wireless/ath/ath12k/wmi.c | 55 +- > drivers/net/wireless/ath/ath12k/wmi.h | 48 +- > drivers/net/wireless/ath/wil6210/netdev.c | 21 +- > drivers/net/wireless/ath/wil6210/wil6210.h | 2 +- > 57 files changed, 1516 insertions(+), 610 deletions(-) > create mode 100644 drivers/net/wireless/ath/ath10k/leds.c > create mode 100644 drivers/net/wireless/ath/ath10k/leds.h Pulled, thanks. a46300b1b09b Merge tag 'ath-next-20240605' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath -- https://patchwork.kernel.org/project/linux-wireless/patch/87a5jzs6w2.fsf@xxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
