Search Linux Wireless

Re: [PATCH v8 16/17] PCI/pwrctl: add a PCI power control driver for power sequenced devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 5, 2024 at 4:13 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> On Wed, Jun 05, 2024 at 02:34:52AM +0300, Dmitry Baryshkov wrote:
> > On Wed, 5 Jun 2024 at 02:23, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > >
> > > On Tue, May 28, 2024 at 09:03:24PM +0200, Bartosz Golaszewski wrote:
> > > > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > > >
> > > > Add a PCI power control driver that's capable of correctly powering up
> > > > devices using the power sequencing subsystem. The first users of this
> > > > driver are the ath11k module on QCA6390 and ath12k on WCN7850.
>
> > > > +static const struct of_device_id pci_pwrctl_pwrseq_of_match[] = {
> > > > +     {
> > > > +             /* ATH11K in QCA6390 package. */
> > > > +             .compatible = "pci17cb,1101",
> > > > +             .data = "wlan",
> > > > +     },
> > > > +     {
> > > > +             /* ATH12K in WCN7850 package. */
> > > > +             .compatible = "pci17cb,1107",
> > > > +             .data = "wlan",
> > > > +     },
> > >
> > > IIUC, "pci17cb,1101" and "pci17cb,1107" exist partly so we can check
> > > that a DTS conforms to the schema, e.g., a "pci17cb,1101" node
> > > contains all the required regulators.  For that use, we obviously need
> > > a very specific "compatible" string.
> > >
> > > Is there any opportunity to add a more generic "compatible" string in
> > > addition to those so this list doesn't have to be updated for every
> > > PMU?  The .data here is "wlan" in both cases, and for this purpose, we
> > > don't care whether it's "pci17cb,1101" or "pci17cb,1107".
> >
> > These two devices have different set of regulators and different
> > requirements to power them on.
>
> Right, but I don't think pci_pwrctl_pwrseq_probe() knows about those
> different sets.  It basically looks like:
>
>   pci_pwrctl_pwrseq_probe(struct platform_device *pdev)
>   {
>     struct pci_pwrctl_pwrseq_data *data;
>     struct device *dev = &pdev->dev;
>
>     data->pwrseq = devm_pwrseq_get(dev, of_device_get_match_data(dev));
>     pwrseq_power_on(data->pwrseq);
>     data->ctx.dev = dev;
>     devm_pci_pwrctl_device_set_ready(dev, &data->ctx);
>   }
>
> I think of_device_get_match_data(dev) will return "wlan" for both
> "pci17cb,1101" and "pci17cb,1107", so devm_pwrseq_get(),
> pwrseq_power_on(), and devm_pci_pwrctl_device_set_ready() don't see
> the distinction between them.
>

These are only the first two users of this generic driver. We may end
up adding more that will use different targets or even extend the
match data with additional fields.

> Of course, they also get "dev", so they can find the device-specifc
> stuff that way, but I think that's on the drivers/power/sequencing/
> side, not in this pci-pwrctl-pwrseq driver itself.
>
> So what if there were a more generic "compatible" string, e.g., if the
> DT contained something like this:
>
>   wifi@0 {
>     compatible = "pci17cb,1101", "wlan-pwrseq";

What even is "pwrseq" in the context of the hardware description? DT
maintainers would like to have a word with you. :)

>     ...
>   }
>
> and pci_pwrctl_pwrseq_of_match[] had this:
>
>   { .compatible = "wlan-pwrseq", .data = "wlan", }
>
> Wouldn't this pci-pwrctl-pwrseq driver work the same?  I'm not a DT
> whiz, so likely I'm missing something, but it would be nice if we
> didn't have to update this very generic-looking driver to add every
> device that needs it.
>

Device-tree describes hardware, not the implementation. You can see
elsewhere in this series that we have the PMU described as a PMIC on
the device tree but we never register with the regulator subsystem nor
do we create actual regulators in C. The HW description does not have
to match the C implementation 1:1 but has to be accurate. There's not
such HW component as "wlan-pwrseq". If you want a good example of such
generic fallback - it'll be the C45 ethernet PHYs as they actually
exist: there's a HW definition of what a broader C45 PHY is, even
though it can be extended in concrete HW designs.

I'd leave this as is.

Bart





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux