Search Linux Wireless

[PATCH] wifi: ath12k: Fix WARN_ON during firmware crash in split-phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Whenever firmware is crashed in split-phy below WARN_ON triggered:

? __warn+0x7b/0x1a0
? drv_stop+0x1eb/0x210 [mac80211]
? report_bug+0x10b/0x200
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? drv_stop+0x1eb/0x210 [mac80211]
ieee80211_do_stop+0x5ba/0x850 [mac80211]
ieee80211_stop+0x51/0x180 [mac80211]
__dev_close_many+0xb3/0x130
dev_close_many+0xa3/0x180
? lock_release+0xde/0x420
dev_close.part.147+0x5f/0xa0
cfg80211_shutdown_all_interfaces+0x44/0xe0 [cfg80211]
ieee80211_restart_work+0xf9/0x130 [mac80211]
process_scheduled_works+0x377/0x6f0

The sequence of WARN_ON is:
Thread 1:
-Firmware crash calls ath12k_core_reset().
-Call ieee80211_restart_hw() inside
 ath12k_core_post_reconfigure_recovery() which schedules worker
 for both hardware.
-Wait for completion of ab->recovery_start.

Thread 2 (worker thread):
-One hardware acquires rtnl_lock() inside ieee80211_restart_hw() and
 calls ath12k_mac_wait_reconfigure() into ath12k_mac_op_start().
-Hardware is waiting for ab->reconfigure_complete but at this time
 recovery_start_count value is 1 because another worker thread
 (local->restart_work) is still waiting for rtnl_lock().
 recovery_start_count is not equal to number of radios
 (2 in split-phy). So ab->recovery_start complete does not set
 due to this, thread 1 is still waiting and not able to perform
 hif power down up and firmware reload.
-Wait timeout happens for ab->reconfigure_complete and comeback
 to caller (ath12k_mac_op_start()) and sends WMI command to
 crashed firmware and gets error.
-This returns error to drv_start() and local->started is set to false.
-Hardware calls cfg80211_shutdown_all_interfaces() after receiving error
 inside ieee80211_restart_work() and goes to drv_stop(), here we trigger
 WARN_ON as local->started is false.

To fix this issue call ieee80211_restart_hw() after firmware has been
reloaded. Now, each hardware can send WMI command to firmware
successfully. With this fix we don't need to wait for
ab->recovery_start completion so remove
ath12k_mac_wait_reconfigure().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Aaradhana Sahu <quic_aarasahu@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/core.c | 21 ++++++++-------------
 drivers/net/wireless/ath/ath12k/core.h |  3 ---
 drivers/net/wireless/ath/ath12k/mac.c  | 23 -----------------------
 3 files changed, 8 insertions(+), 39 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index e7f628e935e4..9fac8b1b064e 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -1059,8 +1059,6 @@ static void ath12k_core_post_reconfigure_recovery(struct ath12k_base *ab)
 				mutex_unlock(&ar->conf_mutex);
 			}
 
-			/* Restart after all the link/radio halt */
-			ieee80211_restart_hw(ah->hw);
 			break;
 		case ATH12K_HW_STATE_OFF:
 			ath12k_warn(ab,
@@ -1087,7 +1085,8 @@ static void ath12k_core_post_reconfigure_recovery(struct ath12k_base *ab)
 static void ath12k_core_restart(struct work_struct *work)
 {
 	struct ath12k_base *ab = container_of(work, struct ath12k_base, restart_work);
-	int ret;
+	struct ath12k_hw *ah;
+	int ret, i;
 
 	ret = ath12k_core_reconfigure_on_crash(ab);
 	if (ret) {
@@ -1095,8 +1094,12 @@ static void ath12k_core_restart(struct work_struct *work)
 		return;
 	}
 
-	if (ab->is_reset)
-		complete_all(&ab->reconfigure_complete);
+	if (ab->is_reset) {
+		for (i = 0; i < ab->num_hw; i++) {
+			ah = ab->ah[i];
+			ieee80211_restart_hw(ah->hw);
+		}
+	}
 
 	complete(&ab->restart_completed);
 }
@@ -1150,20 +1153,14 @@ static void ath12k_core_reset(struct work_struct *work)
 	ath12k_dbg(ab, ATH12K_DBG_BOOT, "reset starting\n");
 
 	ab->is_reset = true;
-	atomic_set(&ab->recovery_start_count, 0);
-	reinit_completion(&ab->recovery_start);
 	atomic_set(&ab->recovery_count, 0);
 
 	ath12k_core_pre_reconfigure_recovery(ab);
 
-	reinit_completion(&ab->reconfigure_complete);
 	ath12k_core_post_reconfigure_recovery(ab);
 
 	ath12k_dbg(ab, ATH12K_DBG_BOOT, "waiting recovery start...\n");
 
-	time_left = wait_for_completion_timeout(&ab->recovery_start,
-						ATH12K_RECOVER_START_TIMEOUT_HZ);
-
 	ath12k_hif_irq_disable(ab);
 	ath12k_hif_ce_irq_disable(ab);
 
@@ -1246,8 +1243,6 @@ struct ath12k_base *ath12k_core_alloc(struct device *dev, size_t priv_size,
 	mutex_init(&ab->core_lock);
 	spin_lock_init(&ab->base_lock);
 	init_completion(&ab->reset_complete);
-	init_completion(&ab->reconfigure_complete);
-	init_completion(&ab->recovery_start);
 
 	INIT_LIST_HEAD(&ab->peers);
 	init_waitqueue_head(&ab->peer_mapping_wq);
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 7d20b09c52e6..96fafa0e05dc 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -846,11 +846,8 @@ struct ath12k_base {
 	struct work_struct reset_work;
 	atomic_t reset_count;
 	atomic_t recovery_count;
-	atomic_t recovery_start_count;
 	bool is_reset;
 	struct completion reset_complete;
-	struct completion reconfigure_complete;
-	struct completion recovery_start;
 	/* continuous recovery fail count */
 	atomic_t fail_cont_count;
 	unsigned long reset_fail_timeout;
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 784964ae03ec..33616ab795af 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -5834,28 +5834,6 @@ static int ath12k_mac_config_mon_status_default(struct ath12k *ar, bool enable)
 	/* TODO: Need to support new monitor mode */
 }
 
-static void ath12k_mac_wait_reconfigure(struct ath12k_base *ab)
-{
-	int recovery_start_count;
-
-	if (!ab->is_reset)
-		return;
-
-	recovery_start_count = atomic_inc_return(&ab->recovery_start_count);
-
-	ath12k_dbg(ab, ATH12K_DBG_MAC, "recovery start count %d\n", recovery_start_count);
-
-	if (recovery_start_count == ab->num_radios) {
-		complete(&ab->recovery_start);
-		ath12k_dbg(ab, ATH12K_DBG_MAC, "recovery started success\n");
-	}
-
-	ath12k_dbg(ab, ATH12K_DBG_MAC, "waiting reconfigure...\n");
-
-	wait_for_completion_timeout(&ab->reconfigure_complete,
-				    ATH12K_RECONFIGURE_TIMEOUT_HZ);
-}
-
 static int ath12k_mac_start(struct ath12k *ar)
 {
 	struct ath12k_hw *ah = ar->ah;
@@ -5987,7 +5965,6 @@ static int ath12k_mac_op_start(struct ieee80211_hw *hw)
 		break;
 	case ATH12K_HW_STATE_RESTARTING:
 		ah->state = ATH12K_HW_STATE_RESTARTED;
-		ath12k_mac_wait_reconfigure(ah->ab);
 		break;
 	case ATH12K_HW_STATE_RESTARTED:
 	case ATH12K_HW_STATE_WEDGED:

base-commit: 0442aec67bbd9cbf93bf7f6ee59c9bf5348b9249
-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux