From: Karthikeyan Periyasamy <quic_periyasa@xxxxxxxxxxx>
When hardware device group abstraction is introduced, QMI firmware
ready event of different devices in a group can be received simultaneously.
To indicate firmware ready event is completed for a particular device in a
group set a flag (ATH12K_FLAG_QMI_FW_READY_COMPLETE). This would be
helpful when hardware recovery is introduced for hardware device group
abstraction.
Add changes to set/unset ATH12K_FLAG_QMI_FW_READY_COMPLETE flag for a
device.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@xxxxxxxxxxx>
Signed-off-by: Harshitha Prem <quic_hprem@xxxxxxxxxxx>
Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/core.h | 1 +
drivers/net/wireless/ath/ath12k/qmi.c | 12 +++++++++---
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index a22f3561deb0..bc2a9e1b1885 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -208,6 +208,7 @@ enum ath12k_dev_flags {
ATH12K_FLAG_HTC_SUSPEND_COMPLETE,
ATH12K_FLAG_CE_IRQ_ENABLED,
ATH12K_FLAG_EXT_IRQ_ENABLED,
+ ATH12K_FLAG_QMI_FW_READY_COMPLETE,
};
struct ath12k_tx_conf {
diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index f273cb93dedb..4bec52afa507 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -3023,6 +3023,8 @@ void ath12k_qmi_firmware_stop(struct ath12k_base *ab)
{
int ret;
+ clear_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags);
+
ret = ath12k_qmi_wlanfw_mode_send(ab, ATH12K_FIRMWARE_MODE_OFF);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send wlan mode off\n");
@@ -3320,7 +3322,7 @@ static void ath12k_qmi_driver_event_work(struct work_struct *work)
break;
case ATH12K_QMI_EVENT_FW_READY:
clear_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags);
- if (test_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags)) {
+ if (test_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags)) {
if (ab->is_reset)
ath12k_hal_dump_srng_stats(ab);
queue_work(ab->workqueue, &ab->restart_work);
@@ -3330,8 +3332,12 @@ static void ath12k_qmi_driver_event_work(struct work_struct *work)
clear_bit(ATH12K_FLAG_CRASH_FLUSH,
&ab->dev_flags);
clear_bit(ATH12K_FLAG_RECOVERY, &ab->dev_flags);
- ath12k_core_qmi_firmware_ready(ab);
- set_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags);
+ ret = ath12k_core_qmi_firmware_ready(ab);
+ if (!ret) {
+ set_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE,
+ &ab->dev_flags);
+ set_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags);
+ }
break;
default:
--
2.34.1
