The RFE type 5 set SPS analog parameters only once at probe stage, but the
setting is missing after suspend/resume, so remove restriction and set the
value when card power on/off.
Fixes: 3ef60f44830a ("wifi: rtw89: 8852b: update hardware parameters for RFE type 5")
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/rtw8852b.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852b.c b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
index 53ae00b5ab7c..517ad1a763fa 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852b.c
@@ -403,6 +403,8 @@ static int rtw8852b_pwr_on_func(struct rtw89_dev *rtwdev)
u32 val32;
u32 ret;
+ rtw8852b_pwr_sps_ana(rtwdev);
+
rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_AFSM_WLSUS_EN |
B_AX_AFSM_PCIE_SUS_EN);
rtw89_write32_set(rtwdev, R_AX_SYS_PW_CTRL, B_AX_DIS_WLBT_PDNSUSEN_SOPC);
@@ -530,9 +532,7 @@ static int rtw8852b_pwr_off_func(struct rtw89_dev *rtwdev)
u32 val32;
u32 ret;
- /* Only do once during probe stage after reading efuse */
- if (!test_bit(RTW89_FLAG_PROBE_DONE, rtwdev->flags))
- rtw8852b_pwr_sps_ana(rtwdev);
+ rtw8852b_pwr_sps_ana(rtwdev);
ret = rtw89_mac_write_xtal_si(rtwdev, XTAL_SI_ANAPAR_WL, XTAL_SI_RFC2RF,
XTAL_SI_RFC2RF);
--
2.25.1
