Add support for 1. enabling MU-MIMO in HE and EHT modes from hardware 2. setting fixed HE rate/GI/LTF 3. 160 MHz bandwidth in HE mode 4. extended NSS bandwidth support Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 changes in v6: - Change comment in patch 01/10 to represent only AP mode implementation. changes in v5: - Fix column length to 80 in patch 01/10 - Fix advertises spelling in patch 09/10 - Fix choosing spelling in patch 10/10 changes in v4: - Fix ath12k-check warnings in patch 2/10 and 7/10 - remove "hostapd" reference in patches 2/10 and 3/10 - remove redundant prerequisite-patch-id's in cover letter changes in v3: - address review comments for fixing ath12k-check issues. changes in v2: - Amend mac80211 patch description as the patch is not specific to AP mode. - Amend EHT MU-MIMO patch description to specify future support for STA mode. Pradeep Kumar Chitrapu (10): wifi: mac80211: Add EHT UL MU-MIMO flag in ieee80211_bss_conf wifi: ath12k: push HE MU-MIMO params to hardware wifi: ath12k: push EHT MU-MIMO params to hardware wifi: ath12k: move HE MCS mapper to a separate function wifi: ath12k: generate rx and tx mcs maps for supported HE mcs wifi: ath12k: fix TX and RX MCS rate configurations in HE mode wifi: ath12k: add support for setting fixed HE rate/GI/LTF wifi: ath12k: clean up 80P80 support wifi: ath12k: add support for 160 MHz bandwidth wifi: ath12k: add extended NSS bandwidth support for 160 MHz drivers/net/wireless/ath/ath12k/core.h | 2 + drivers/net/wireless/ath/ath12k/mac.c | 1052 ++++++++++++++++++++---- drivers/net/wireless/ath/ath12k/mac.h | 17 + drivers/net/wireless/ath/ath12k/wmi.c | 24 +- drivers/net/wireless/ath/ath12k/wmi.h | 98 ++- include/net/mac80211.h | 4 + net/mac80211/cfg.c | 5 + 7 files changed, 994 insertions(+), 208 deletions(-) base-commit: 5b501f801ab443046d5c31881bba21350396e5c5 -- 2.17.1
