The frequency in the rx status is currently being filled
incorrectly for the 6 GHz band. The channel number received is
invalid in this case, resulting in packet drops. Fix this
issue by correcting the frequency calculation.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@xxxxxxxxxxx>
Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/dp_rx.c | 9 ++++++---
drivers/net/wireless/ath/ath12k/wmi.c | 10 +++++++---
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index 952a377b5491..9f3db6c1b7fc 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -2359,8 +2359,10 @@ void ath12k_dp_rx_h_ppdu(struct ath12k *ar, struct hal_rx_desc *rx_desc,
channel_num = meta_data;
center_freq = meta_data >> 16;
- if (center_freq >= 5935 && center_freq <= 7105) {
+ if (center_freq >= ATH12K_MIN_6G_FREQ &&
+ center_freq <= ATH12K_MAX_6G_FREQ) {
rx_status->band = NL80211_BAND_6GHZ;
+ rx_status->freq = center_freq;
} else if (channel_num >= 1 && channel_num <= 14) {
rx_status->band = NL80211_BAND_2GHZ;
} else if (channel_num >= 36 && channel_num <= 173) {
@@ -2378,8 +2380,9 @@ void ath12k_dp_rx_h_ppdu(struct ath12k *ar, struct hal_rx_desc *rx_desc,
rx_desc, sizeof(*rx_desc));
}
- rx_status->freq = ieee80211_channel_to_frequency(channel_num,
- rx_status->band);
+ if (rx_status->band != NL80211_BAND_6GHZ)
+ rx_status->freq = ieee80211_channel_to_frequency(channel_num,
+ rx_status->band);
ath12k_dp_rx_h_rate(ar, rx_desc, rx_status);
}
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 7a52d2082b79..e88ec9e1201a 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -6022,8 +6022,10 @@ static void ath12k_mgmt_rx_event(struct ath12k_base *ab, struct sk_buff *skb)
if (rx_ev.status & WMI_RX_STATUS_ERR_MIC)
status->flag |= RX_FLAG_MMIC_ERROR;
- if (rx_ev.chan_freq >= ATH12K_MIN_6G_FREQ) {
+ if (rx_ev.chan_freq >= ATH12K_MIN_6G_FREQ &&
+ rx_ev.chan_freq <= ATH12K_MAX_6G_FREQ) {
status->band = NL80211_BAND_6GHZ;
+ status->freq = rx_ev.chan_freq;
} else if (rx_ev.channel >= 1 && rx_ev.channel <= 14) {
status->band = NL80211_BAND_2GHZ;
} else if (rx_ev.channel >= 36 && rx_ev.channel <= ATH12K_MAX_5G_CHAN) {
@@ -6044,8 +6046,10 @@ static void ath12k_mgmt_rx_event(struct ath12k_base *ab, struct sk_buff *skb)
sband = &ar->mac.sbands[status->band];
- status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
- status->band);
+ if (status->band != NL80211_BAND_6GHZ)
+ status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
+ status->band);
+
status->signal = rx_ev.snr + ATH12K_DEFAULT_NOISE_FLOOR;
status->rate_idx = ath12k_mac_bitrate_to_idx(sband, rx_ev.rate / 100);
--
2.17.1
