Search Linux Wireless

[PATCH V4 03/10] wifi: ath12k: push EHT MU-MIMO params to hardware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, only the EHT IE in management frames is updated with
respect to MU-MIMO configurations, but this change is not
reflected in the hardware. Add support to propagate MU-MIMO
configurations to the hardware as well for AP mode. Similar
support for STA mode will be added in future.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Co-developed-by: Muna Sinada <quic_msinada@xxxxxxxxxxx>
Signed-off-by: Muna Sinada <quic_msinada@xxxxxxxxxxx>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/mac.c | 50 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath12k/wmi.h | 21 +++++++++++
 2 files changed, 71 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 5e3b7894d4f4..f58558a52eef 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -2630,6 +2630,50 @@ static int ath12k_mac_vif_recalc_sta_he_txbf(struct ath12k *ar,
 	return 0;
 }
 
+static int ath12k_mac_set_eht_txbf_conf(struct ath12k_vif *arvif)
+{
+	u32 param = WMI_VDEV_PARAM_SET_EHT_MU_MODE;
+	struct ath12k *ar = arvif->ar;
+	u32 value = 0;
+	int ret;
+
+	if (!arvif->vif->bss_conf.eht_support)
+		return 0;
+
+	if (arvif->vif->bss_conf.eht_su_beamformer) {
+		value |= u32_encode_bits(EHT_SU_BFER_ENABLE, EHT_MODE_SU_TX_BFER);
+		if (arvif->vif->bss_conf.eht_mu_beamformer &&
+		    arvif->vdev_type == WMI_VDEV_TYPE_AP)
+			value |= u32_encode_bits(EHT_MU_BFER_ENABLE,
+						 EHT_MODE_MU_TX_BFER) |
+				 u32_encode_bits(EHT_DL_MUOFDMA_ENABLE,
+						 EHT_MODE_DL_OFDMA_MUMIMO) |
+				 u32_encode_bits(EHT_UL_MUOFDMA_ENABLE,
+						 EHT_MODE_UL_OFDMA_MUMIMO);
+	}
+
+	if (arvif->vif->type != NL80211_IFTYPE_MESH_POINT) {
+		value |= u32_encode_bits(EHT_DL_MUOFDMA_ENABLE, EHT_MODE_DL_OFDMA) |
+			 u32_encode_bits(EHT_UL_MUOFDMA_ENABLE, EHT_MODE_UL_OFDMA);
+
+		if (arvif->vif->bss_conf.eht_80mhz_full_bw_ul_mumimo)
+			value |= u32_encode_bits(EHT_UL_MUMIMO_ENABLE, EHT_MODE_MUMIMO);
+
+		if (arvif->vif->bss_conf.eht_su_beamformee)
+			value |= u32_encode_bits(EHT_SU_BFEE_ENABLE,
+						 EHT_MODE_SU_TX_BFEE);
+	}
+
+	ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath12k_warn(ar->ab, "failed to set vdev %d EHT MU mode: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void ath12k_bss_assoc(struct ath12k *ar,
 			     struct ath12k_vif *arvif,
 			     struct ieee80211_bss_conf *bss_conf)
@@ -3015,6 +3059,12 @@ static void ath12k_mac_bss_info_changed(struct ath12k *ar,
 				ath12k_warn(ar->ab,
 					    "failed to set HE TXBF config for vdev: %d\n",
 					    arvif->vdev_id);
+
+			ret = ath12k_mac_set_eht_txbf_conf(arvif);
+			if (ret)
+				ath12k_warn(ar->ab,
+					    "failed to set EHT TXBF config for vdev: %d\n",
+					    arvif->vdev_id);
 		}
 		ath12k_control_beaconing(arvif, info);
 
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 03aab0531aa4..161e0ab5efe8 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -1138,6 +1138,7 @@ enum wmi_tlv_vdev_param {
 	WMI_VDEV_PARAM_BSS_COLOR,
 	WMI_VDEV_PARAM_SET_HEMU_MODE,
 	WMI_VDEV_PARAM_HEOPS_0_31 = 0x8003,
+	WMI_VDEV_PARAM_SET_EHT_MU_MODE = 0x8005,
 };
 
 enum wmi_tlv_peer_flags {
@@ -2985,6 +2986,26 @@ struct ath12k_wmi_rx_reorder_queue_remove_arg {
 #define HE_MU_BFER_ENABLE	1
 #define HE_SU_BFER_ENABLE	1
 
+#define EHT_MODE_SU_TX_BFEE		BIT(0)
+#define EHT_MODE_SU_TX_BFER		BIT(1)
+#define EHT_MODE_MU_TX_BFEE		BIT(2)
+#define EHT_MODE_MU_TX_BFER		BIT(3)
+#define EHT_MODE_DL_OFDMA		BIT(4)
+#define EHT_MODE_UL_OFDMA		BIT(5)
+#define EHT_MODE_MUMIMO			BIT(6)
+#define EHT_MODE_DL_OFDMA_TXBF		BIT(7)
+#define EHT_MODE_DL_OFDMA_MUMIMO	BIT(8)
+#define EHT_MODE_UL_OFDMA_MUMIMO	BIT(9)
+
+#define EHT_DL_MUOFDMA_ENABLE    1
+#define EHT_UL_MUOFDMA_ENABLE    1
+#define EHT_DL_MUMIMO_ENABLE     1
+#define EHT_UL_MUMIMO_ENABLE     1
+#define EHT_MU_BFEE_ENABLE       1
+#define EHT_SU_BFEE_ENABLE       1
+#define EHT_MU_BFER_ENABLE       1
+#define EHT_SU_BFER_ENABLE       1
+
 #define HE_VHT_SOUNDING_MODE_ENABLE		1
 #define HE_SU_MU_SOUNDING_MODE_ENABLE		1
 #define HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE	1
-- 
2.17.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux