Search Linux Wireless

Re: [PATCH v3 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/29/2024 7:04 AM, Marc Gonzalez wrote:
> The ath10k driver waits for an "MSA_READY" indicator
> to complete initialization. If the indicator is not
> received, then the device remains unusable.
> 
> cf. ath10k_qmi_driver_event_work()
> 
> Several msm8998-based devices are affected by this issue.
> Oddly, it seems safe to NOT wait for the indicator, and
> proceed immediately when QMI_EVENT_SERVER_ARRIVE.
> 
> Jeff Johnson wrote:
> 
>   The feedback I received was "it might be ok to change all ath10k qmi
>   to skip waiting for msa_ready", and it was pointed out that ath11k
>   (and ath12k) do not wait for it.
> 
>   However with so many deployed devices, "might be ok" isn't a strong
>   argument for changing the default behavior.
> 
> Kalle Valo first suggested setting a bit in firmware-5.bin to trigger
> work-around in the driver. However, firmware-5.bin is parsed too late.
> So we are stuck with a DT property.
> 
> Signed-off-by: Pierre-Hugues Husson <phhusson@xxxxxxxxxx>
> Signed-off-by: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> index 9b3ef4bc37325..9070a41f7fc07 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> @@ -122,6 +122,11 @@ properties:
>        Whether to skip executing an SCM call that reassigns the memory
>        region ownership.
>  
> +  qcom,no-msa-ready-indicator:
> +    type: boolean
> +    description:
> +      Don't wait for MSA_READY indicator to complete init.
> +
>    qcom,smem-states:
>      $ref: /schemas/types.yaml#/definitions/phandle-array
>      description: State bits used by the AP to signal the WLAN Q6.
with SOB cleaned up:
Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux