From: Kang Yang <quic_kangyang@xxxxxxxxxxx> ath12k_mac_op_unassign_vif_chanctx() will do vdev down in function ath12k_mac_monitor_stop(). So no need to do vdev down again. remove the duplicated one. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath12k/mac.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 4f553f2a7165..9a2823bcf8fc 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -7379,10 +7379,6 @@ ath12k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw, } arvif->is_started = false; - if (ab->hw_params->vdev_start_delay && - arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) - ath12k_wmi_vdev_down(ar, arvif->vdev_id); - if (arvif->vdev_type != WMI_VDEV_TYPE_MONITOR && ar->num_started_vdevs == 1 && ar->monitor_vdev_created) ath12k_mac_monitor_stop(ar); -- 2.34.1