On Sun, 7 Dec 2008 20:53:51 +0530 Sujith wrote: [...] ["This" snipped since I couldn't identify the line/lines doing it] > This indicates that HT40 has been chosen. > > The problem is this: > > After association, ath9k has to set the appropriate channel width on > doing a scan and mac80211 comes back to the home channel. Currently > there is no such means to do that, and this why pinging fails. > > We'll work on a solution, but until then you would have to choose > HT20 in your AP. All protocols are affected ping, whatever lies below telnet and http through lynx was dead as well. Ok, I'll try this version out a bit first with heavy p2p-transfers. If it survives I might stick with it (2.6.28-rc6-wl died after awhile) otherwise I'll go back to my all time favourite 2.6.27-rc5. Wicd manager seems to keep a static list of APs in the environment I've already scanned, so the issue is normally of no concern. /Mats -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
