On 2024/4/14 21:10, Lingbo Kong wrote:
Currently, the transmit rate, the receive rate and signal strength of
“iw dev xxx station dump” always show an invalid value.
This is because ath12k has no logic to handle this relevant information.
To solve this issue, ath12k parses the information passed by the firmware
and passes it to mac80211.
After that, "iw dev xxx station dump" show the correct value.
Such as:
Station 00:03:7f:12:03:03 (on wlo1)
inactive time: 600 ms
rx bytes: 4642228
rx packets: 23796
tx bytes: 933967
tx packets: 8761
tx retries: 66
tx failed: 0
beacon loss: 0
beacon rx: 8925
rx drop misc: 191
signal: -20 dBm
beacon signal avg: -18 dBm
tx bitrate: 1441.1 MBit/s 80MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0
tx duration: 0 us
rx bitrate: 1801.4 MBit/s 80MHz EHT-MCS 11 EHT-NSS 3 EHT-GI 0
rx duration: 0 us
v3:
1.change wmi_vdev_stats_event to wmi_vdev_stats_params
v2:
1.change copyright
2.change name according Naming conventions for structures
Lingbo Kong (3):
wifi: ath12k: report station mode transmit rate
wifi: ath12k: report station mode receive rate for IEEE 802.11be
wifi: ath12k: report station mode signal strength
drivers/net/wireless/ath/ath12k/core.h | 5 +
drivers/net/wireless/ath/ath12k/dp_rx.c | 20 ++-
drivers/net/wireless/ath/ath12k/dp_rx.h | 3 +
drivers/net/wireless/ath/ath12k/dp_tx.c | 147 +++++++++++++++++-
drivers/net/wireless/ath/ath12k/hal_tx.h | 9 +-
drivers/net/wireless/ath/ath12k/mac.c | 180 +++++++++++++++++++++-
drivers/net/wireless/ath/ath12k/mac.h | 3 +
drivers/net/wireless/ath/ath12k/rx_desc.h | 2 +
drivers/net/wireless/ath/ath12k/wmi.c | 130 ++++++++++++++++
drivers/net/wireless/ath/ath12k/wmi.h | 48 ++++++
10 files changed, 538 insertions(+), 9 deletions(-)
base-commit: 363e7193eaf258fe7f04e8db560bd8a282a12cd9
Please ignore this series. Need to change some commit message.
I will modify in v4.
