There is no driver to match these two channels, so
remove them. This fixes warnings from MHI subsystem during suspend:
mhi mhi0_LOOPBACK: 1: Failed to reset channel, still resetting
mhi mhi0_LOOPBACK: 0: Failed to reset channel, still resetting
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/mhi.c | 56 ---------------------------
1 file changed, 56 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/mhi.c b/drivers/net/wireless/ath/ath12k/mhi.c
index fd519c87ae24..403691355abf 100644
--- a/drivers/net/wireless/ath/ath12k/mhi.c
+++ b/drivers/net/wireless/ath/ath12k/mhi.c
@@ -18,34 +18,6 @@
#define OTP_VALID_DUALMAC_BOARD_ID_MASK 0x1000
static const struct mhi_channel_config ath12k_mhi_channels_qcn9274[] = {
- {
- .num = 0,
- .name = "LOOPBACK",
- .num_elements = 32,
- .event_ring = 1,
- .dir = DMA_TO_DEVICE,
- .ee_mask = 0x4,
- .pollcfg = 0,
- .doorbell = MHI_DB_BRST_DISABLE,
- .lpm_notify = false,
- .offload_channel = false,
- .doorbell_mode_switch = false,
- .auto_queue = false,
- },
- {
- .num = 1,
- .name = "LOOPBACK",
- .num_elements = 32,
- .event_ring = 1,
- .dir = DMA_FROM_DEVICE,
- .ee_mask = 0x4,
- .pollcfg = 0,
- .doorbell = MHI_DB_BRST_DISABLE,
- .lpm_notify = false,
- .offload_channel = false,
- .doorbell_mode_switch = false,
- .auto_queue = false,
- },
{
.num = 20,
.name = "IPCR",
@@ -111,34 +83,6 @@ const struct mhi_controller_config ath12k_mhi_config_qcn9274 = {
};
static const struct mhi_channel_config ath12k_mhi_channels_wcn7850[] = {
- {
- .num = 0,
- .name = "LOOPBACK",
- .num_elements = 32,
- .event_ring = 0,
- .dir = DMA_TO_DEVICE,
- .ee_mask = 0x4,
- .pollcfg = 0,
- .doorbell = MHI_DB_BRST_DISABLE,
- .lpm_notify = false,
- .offload_channel = false,
- .doorbell_mode_switch = false,
- .auto_queue = false,
- },
- {
- .num = 1,
- .name = "LOOPBACK",
- .num_elements = 32,
- .event_ring = 0,
- .dir = DMA_FROM_DEVICE,
- .ee_mask = 0x4,
- .pollcfg = 0,
- .doorbell = MHI_DB_BRST_DISABLE,
- .lpm_notify = false,
- .offload_channel = false,
- .doorbell_mode_switch = false,
- .auto_queue = false,
- },
{
.num = 20,
.name = "IPCR",
--
2.25.1
