Hi Johannes and Brian,
I think this patch is used to leverage MLME of wpa_supplicant and hostapd. It won't affect the usage of cfg80211 for mwifiex. I wonder if I can prepare patch v10.
David
> From: Brian Norris <briannorris@xxxxxxxxxxxx>
> Sent: Wednesday, April 3, 2024 1:39 AM
> To: David Lin <yu-hao.lin@xxxxxxx>; Johannes Berg
> <johannes@xxxxxxxxxxxxxxxx>
> Cc: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>; Francesco Dolcini
> <francesco@xxxxxxxxxx>; kvalo@xxxxxxxxxx; linux-wireless@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; Pete Hsieh <tsung-hsien.hsieh@xxxxxxx>;
> rafael.beims <rafael.beims@xxxxxxxxxxx>; Francesco Dolcini
> <francesco.dolcini@xxxxxxxxxxx>
> Subject: Re: [EXT] Re: [PATCH v9 0/2] wifi: mwifiex: add code to support host
> mlme
>
> Hi Johannes and David,
>
> On Fri, Mar 29, 2024 at 10:06:19AM +0000, David Lin wrote:
> > > From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
> > >
> > > The way I see it, the issue here isn't necessarily the fact that
> > > this uses the auth command (and then requires assoc, of course), but
> > > that we see here this is "growing" towards a more mac80211-like
> > > model, with the code duplication (albeit little that it is today)
> > > implied by that. To me, it seems like the firmware is moving into the "oh
> we can't do all _that_ in firmware"
> > > territory, and that brings it closer to mac80211.
> > >
> > > At the same time, as you say, mac80211 is doing more and more
> > > offload capability, so it seems like apart from "today the firmware
> > > requires an assoc command rather than assoc frame processing in the
> > > host", it's actually not _that_ far apart any more!
> > >
> > > Now that may be an issue in the short term, but I wouldn't be
> > > surprised at all if desiring to implement FILS and other new
> > > features in this space would make the driver move to assoc frame
> > > processing in the host as well, because it's getting more and more complex,
> just like auth.
> > >
> > > At which point - yeah the APIs are still significantly different,
> > > but again we'd end up implementing something that exists in mac80211
> > > today and taking it into mwifiex?
>
> So it seems there's 2 possible sticking points: code duplication, and overall
> trend in the specs and implementation that might increase duplication?
>
> To me, it seems like the duplication is minimal today, or at least, not much as a
> result of anything in this patch proposal. There's some repetition of 802.11
> definitions already, but that's probably orthogonal.
>
> I have less understanding and foresight on the "trend" questions, although
> David seems to somewhat agree in his response below -- that NXP intends to
> handle modern security features in the host more and more, which could
> indeed mean a bit more framing-related duplication.
>
> > Mwifiex is designed based on a "Thick FW" architecture.
> > As security features become more complicated, this patch adds WPA3
> > support by offloading to wpa_supplicant/hostapd With this patch, auth, assoc
> and key handshakes are handled in wpa_supplicant/hostapd.
> > Wpa_supplicant communicates peer capability and derived keys to
> driver/FW via cfg80211 assoc and add_key commands.
> > The cfg80211 commands are standard. Implementation between driver and
> firmware is vendor specific. It shall not break any existing architecture.
> >
> > > > It may be harder to add
> > > > future additions to the mac80211 stack [*], if we have to add new
> > > > concerns of a non-mac80211 implementation in the mix.
> > >
> > > Not sure that makes a difference for mac80211 in itself, obviously
> > > changes in this space would then affect mwifiex, but that shouldn't
> > > be much of an issue.
> > >
> >
> > With this patch Mwifiex still a non-mac80211 implementation.
> > Driver communicates with wpa_supplicant/hostapd via cfg80211 I think
> > how driver/FW communicate each other is proprietary, I don't see a
> > dependency with mac80211 here
>
> David, I may have pointed in the wrong direction by claiming "conflict"
> with mac80211. I believe Johannes's concerns are in code duplication.
> Pretty much all other actively-maintained Linux WiFi drivers are based on
> mac80211, so that we don't all have to implement the same frame
> construction and parsing code. mwifiex is somewhat of an outlier in actively
> adding new features while remaining a cfg80211-only driver.
>
> But for myself, I'm not even fully convinced mac80211-style stuff makes sense
> here. Even just looking at the auth() stuff in patch 1, this driver is far from a
> thin layer that allows mac80211 to handle the
> 802.11 details. Just look at the 'priv->host_mlme_reg' and
> HostCmd_CMD_MGMT_FRAME_REG stuff -- it seems that the simple act of
> sending a single 802.11 frame requires opting into some FW-specific command
> mask. This feels "thick", like David mentioned above.
>
> > > I'm less worried about this individual patch than what it says about
> > > the direction this driver and firmware are taking, and I fear we'll
> > > end up in a situation where over time this driver actually gets to a
> > > point where it should be using mac80211, but because it's such a
> > > piece-meal affair (auth frames now, etc.) and large architectural change,
> they'd never actually do that.
> > >
> > > To be fair, that might also require firmware API changes in some
> > > way. I used to think that was something we should never require, but
> > > I'm not so sure now any more - certainly we've changed our (Intel)
> > > FW API in support of Linux architecture many times, and overall
> > > that's for a better product (on Linux at least.)
>
> Yeah, I feel like I see hints of stuff (in public driver code, and in internal
> discussions with vendors) where things really work best in
> mac80211 land if firmware is developed with *some* consideration for the
> mac80211 Linux architecture (or else already is a very thin firmware from the
> start). I don't feel like Marvell/NXP has that consideration at all, and so trying
> to drag its firmware into mac80211 regardless would bring its own unique pain.
> But that's just a lightly-educated feeling.
>
> > > Also: David, I'd appreciate if you actually took this discussion
> > > seriously; so far you've not really contributed any technical arguments.
> >
> > I think we are using standard cfg80211 commands. How it's handled
> > between driver/FW is proprietary, it's carefully verified and shall
> > not impact other features or break any architecture.
>
> David, repeating the "carefully verified" stuff doesn't really help the subject at
> hand, and it's not really a technical argument either, when it's not
> accompanied by any proofs. Being careful and running a good QA cycle are
> excellent and appreciated, but that's not what we're talking about any more.
> We're trying to understand what the firmware architecture is like, and what
> driver architecture matches your future development best, with the needs of
> the Linux community in mind.
>
> (Now, as an example useful argument: if you claimed that implementing a
> mac80211 driver with a generalized ieee80211_ops::tx() function would
> introduce unvetted combinations of control logic that cannot be reconciled
> with your HostCmd protocols, or that QA can't properly vet that ... well, that
> would be a start of a technical argument. But it would require more than a
> sentence or two to describe why that's impossible or difficult.)
>
> > We do not see a need why driver has to be redesigned based on
> > mac80211. We can keep adding new features using cfg80211.
>
> All in all, other than being a little grumpy about reviewing new features here,
> I'm still leaning toward David's statement here -- that I don't see why it *must*
> be rewritten toward mac80211. But I still defer to Johannes, and I'm just trying
> to be a bit of a referee, or the proverbial "devil's advocate".
>
> Brian
