Different channels have different TX power settings. rtl8192de is using the TX power setting from the wrong channel in the 5 GHz band because _rtl92c_phy_get_rightchnlplace expects an array which includes all the channel numbers, but it's using an array which includes only the 5 GHz channel numbers. Use the array channel_all (defined in rtl8192de/phy.c) instead of the incorrect channel5g (defined in core.c). Tested only with rtl8192du, which will use the same TX power code. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> --- v4: - CC stable. v3: - No change. v2: - No change from v1, which was originally sent separately: https://lore.kernel.org/linux-wireless/9995b805-ef8b-47c9-b176-ff540066039a@xxxxxxxxx/ --- drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c index d835a27429f0..56b5cd032a9a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c @@ -892,8 +892,8 @@ static u8 _rtl92c_phy_get_rightchnlplace(u8 chnl) u8 place = chnl; if (chnl > 14) { - for (place = 14; place < ARRAY_SIZE(channel5g); place++) { - if (channel5g[place] == chnl) { + for (place = 14; place < ARRAY_SIZE(channel_all); place++) { + if (channel_all[place] == chnl) { place++; break; } -- 2.44.0