Search Linux Wireless

Re: [PATCH RFC v2 0/4] wifi: ath10k: support board-specific firmware overrides

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 5 Apr 2024 at 15:41, Kalle Valo <kvalo@xxxxxxxxxx> wrote:
>
> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> writes:
>
> > On Fri, 5 Apr 2024 at 15:01, Kalle Valo <kvalo@xxxxxxxxxx> wrote:
> >
> >>
> >> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> writes:
> >>
> >> > On Fri, 8 Mar 2024 at 17:19, Kalle Valo <kvalo@xxxxxxxxxx> wrote:
> >> >>
> >> >> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> writes:
> >> >>
> >> >> >> To be on the safe side using 'qcom-rb1' makes sense but on the other
> >> >> >> hand that means we need to update linux-firmware (basically add a new
> >> >> >> symlink) everytime a new product is added. But are there going to be
> >> >> >> that many new ath10k based products?
> >> >> >>
> >> >> >> Using 'qcm2290' is easier because for a new product then there only
> >> >> >> needs to be a change in DTS and no need to change anything
> >> >> >> linux-firmware. But here the risk is that if there's actually two
> >> >> >> different ath10k firmware branches for 'qcm2290'. If that ever happens
> >> >> >> (I hope not) I guess we could solve that by adding new 'qcm2290-foo'
> >> >> >> directory?
> >> >> >>
> >> >> >> But I don't really know, thoughts?
> >> >> >
> >> >> > After some thought, I'd suggest to follow approach taken by the rest
> >> >> > of qcom firmware:
> >> >>
> >> >> Can you provide pointers to those cases?
> >> >
> >> > https://gitlab.com/kernel-firmware/linux-firmware/-/tree/main/qcom/sc8280xp/LENOVO/21BX
> >> >
> >> >>
> >> >> > put a default (accepted by non-secured hardware) firmware to SoC dir
> >> >> > and then put a vendor-specific firmware into subdir. If any of such
> >> >> > vendors appear, we might even implement structural fallback: first
> >> >> > look into sdm845/Google/blueline, then in sdm845/Google, sdm845/ and
> >> >> > finally just under hw1.0.
> >> >>
> >> >> Honestly that looks quite compilicated compared to having just one
> >> >> sub-directory. How will ath10k find the directory names (or I vendor and
> >> >> model names) like 'Google' or 'blueline' in this example?
> >> >
> >> > I was thinking about the firmware-name = "sdm845/Google/blueline". But
> >> > this can be really simpler, firmware-name = "blueline" or
> >> > "sdm845/blueline" with no need for fallbacks.
> >>
> >> I have been also thinking about this and I would prefer not to have the
> >> fallbacks. But good if you agree with that.
> >>
> >> IMHO just "sdm845-blueline" would be the most simple. I don't see the
> >> point of having a directory structure when there are not that many
> >> directories really. But this is just cosmetics.
> >
> > It is "not many directories" if we are thinking about the
> > linux-firmware or open devices. But once embedded distros start
> > picking this up for the supported devices, this can quickly become a
> > nuisance.
>
> Ok. Just out of curiosity, any ideas how many devices/products are there
> with wcn3990 who want to use ath10k?

Just for the DT in mainline I can count about 30 devices that have
ath10k WiFi node:

arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi:&wifi {
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts:&wifi {
arch/arm64/boot/dts/qcom/msm8998-mtp.dts:&wifi {
arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi:&wifi {
arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts:&wifi {
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts:&wifi {
arch/arm64/boot/dts/qcom/sc7180-idp.dts:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts:&wifi {
arch/arm64/boot/dts/qcom/sc8180x-primus.dts:&wifi {
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sdm845-db845c.dts:&wifi {
arch/arm64/boot/dts/qcom/sdm845-mtp.dts:&wifi {
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts:&wifi {
arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts:&wifi {
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi:&wifi {
arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts:&wifi {
arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts:&wifi {
arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts:&wifi {
arch/arm64/boot/dts/qcom/sm8150-mtp.dts:&wifi {
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts:&wifi {
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts:&wifi {

The list doesn't include e.g. PIxel 2-3-4-5 or some other phones which
are still on their way for the proper mainline support.
--
With best wishes
Dmitry




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux